Bedienungsanleitung Yaesu VX-8GR (Seite 129 von 168) (Englisch)

478493

129

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

VX-8GR/GE OPERATING MANUAL 127

SET MODE

50: MEMORY SKIP

51: MEMORY WRITE

52: MESSAGE LIST

53: MESSAGE REGISTER

54: MESSAGE SELECT

55: MIC GAIN

56: MONI/T-CALL

57: MUTE

58: OFF TIMER

59: ON TIMER

60: OPENING MESSAGE

61: PAGER ANS-BACK

62: PAGER CODE-RX

63: PAGER CODE-TX

64: PASSWORD

65: PR FREQUENCY

66: PRI REVERT

67: PRI TIME

68: PTT DELAY

69: RPT ARS

70: RPT SHIFT

71: RPT SHIFT FREQ

72: RX MODE

73: SAVE RX

74: SAVE TX

75: SCAN LAMP

76: SCAN RE-START

77: SCAN RESUME

78: SENSOR DISPLAY

79: SENSOR INFO

80: SET MODE CSR

81: SET MODE FORMAT

82: SMART SEARCH

83: S-METER SYMBOL

84: SPEC-ANALYZER

85: SQL LEVEL

86: SQL S-METER

87: SQL SPLIT

88: SQL TYPE

89: STEP FREQUENCY

90: TIME SET

91: TONE FREQUENCY

92: TONE-SRCH MUTE

93: TONE-SRCH SPEED

94: TOT

95: VFO MODE

96: VFO SKIP

97: VIBRATOR

98: VIBRATOR MODE

99: VOLUME MODE

100: WX ALERT

Selects the Memory Scan channel-selection mode.

Determines the method of selecting channels for Memory Storage.

Programming a Member List for the Message feature.

Selects your Personal ID for the Message feature.

Programming a Message for the Message feature.

Adjusts the microphone gain level.

Selects the MONI/T.CALL key (just below the PTT switch) function.

Adjusts the receiver audio output level when the MUTE function was activated.

Set the OFF Timer time.

Set the ON Timer time.

Selects the Opening Message that appears when the radio is powered on.

Enables/Disables the Answer Back function of the Enhanced CTCSS Paging & Code Squelch.

Sets the Receiver Pager Code for the Enhanced CTCSS Paging & Code Squelch.

Sets the Transmitting Pager Code for the Enhanced CTCSS Paging & Code Squelch.

Programming and activating the Password feature.

Program the CTCSS Tone Frequency for the User Programmed Reverse CTCSS Decoder.

Enables/Disables the Priority Revert feature.

Selects the time between the Priority (Dual Watch) channel checks, when the feature is

active.

Selects the time delay before the carrier is transmitted, when the PTT switch is pressed.

Enables/Disables the Automatic Repeater Shift function.

Sets the Repeater Shift Direction.

Sets the magnitude of the Repeater Shift.

Sets the receiving mode.

Selects the Receive-mode Battery Saver interval (“sleep” ratio).

Enables/Disables the Transmitter Battery Saver.

Enables/Disables the Scan Lamp (while scanner is paused).

Selects the Scan Re-start Delay time.

Selects the Scan Resume mode.

Selects the sensor information when the transceiver is operating in the “Mono” band mode

with large characters.

Indicates the Information of the internal sensors.

Selects the Set Mode Cursor.

Selects the display format of the Set Mode operation.

Selects the Smart Search Sweep mode.

Selects the S- & TX PO meter Symbol.

Selects the Spectrum Analyzer sweep mode.

Sets the Squelch threshold level.

Adjusts the Squelch threshold level to the S-meter level.

Enables/disables split CTCSS/DCS coding.

Selects the Tone Encoder and/or Decoder mode.

Setting of the DIAL frequency steps.

Sets the Clock time.

Setting of the CTCSS Tone Frequency.

Enables/Disables the receiver audio output while the Tone Search Scanner is activated.

Selects the Tone Search Scanner speed.

Setting of the TOT time.

Selects or disables the VFO band edge limiting for the current band.

Setting My Band.

Enables/Disables the Vibrator function.

Selects the vibration mode of the Vibrator function.

Select the

[

VOL

]

key function.

Enables/Disables the Weather Alert Feature.

OFF / SKIP / ONLY

NEXT / LOWER

LEVEL 1 ~ LEVEL 9

(

LEVEL 5

)

MONI / T-CALL

1

MUTE 30%, MUTE 50%,

MUTE 100%, or OFF

NORMAL / OFF / DC / MESSAGE

ON / OFF

300Hz ~ 3000Hz (1000Hz/step)

(

1600Hz

)

ON / OFF

0.1sec ~ 0.9sec (0.1sec/step) or

1.0sec ~ 10.0sec (0.5sec/step)

(

5.0sec

)

OFF / 20ms / 50ms / 100ms / 200ms

ON / OFF

SIMPLEX / -RPT / +RPT

0.000MHz ~ 150.000MHz (50 kHz/step)

2

AUTO / NFM / AM

0.2sec ~ 0.9sec (0.1sec/step),

1.0sec ~ 9.5sec (0.5sec/step), or

10.0sec ~ 60.0sec (5sec/step)

ON / OFF

0.1sec ~ 0.9sec (0.1sec/step) or

1.0sec ~ 10.0sec (0.5sec/step)

(

2.0sec

)

2.0sec ~ 10.0sec (0.5sec/step) /BUSY /

HOLD

(

5.0sec

)

DC / TEMP / OFF

Nine patterns

LIST / ITEM

SINGLE / CONTINUOUS

Four patterns

1Time / CONTINUOUS / Full Time

LEVEL 0 ~ LEVEL 15

(

LEVEL 1

)

OFF / LEVEL 0 ~ LEVEL 9

OFF / ON

OFF / TONE / TONE SQL / DCS /

REV TONE / PR FREQ / PAGER / MESSAGE

AUTO / 5.0 / 6.25 / 8.33 / 10.0 / 12.5 / 15.0 /

20.0 / 25.0 / 50.0 / 100.0 kHz

50 standard CTCSS tones

(

100.0Hz

)

ON / OFF

FAST (2.5 tone/sec) / SLOW (1.25 tone/sec)

OFF / 0.5min ~ 10.0min (0.5min/step)

(

3.0min

)

ALL / BAND

OFF / BUSY / SIGNALING

MODE1 / MODE2 / MODE3

NORMAL / AUTO BACK

ON / OFF

SET MODE ITEM FUNCTION

AVAILABLE VALUES

(

DEF ALT: UNDERLINED BOLD

)



1: Depends on the transceiver version.



2: Depends on the operating band and transceiver version.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yaesu VX-8GR Seite 129

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info