Bedienungsanleitung Yamaha 01V96 version 2 (Seite 319 von 330) (Spanisch)

559197

319

Zoom out

Zoom in

Vorherige Seite

1/330

Nächste Seite

Formato de información MIDI 319

01V96 Version 2—Manual de instrucciones

2.8.3.21 Parameter request (Sort Table)

When the 01V96 receives this data, it will transmit Sort Table Data.

2.8.3.22 Parameter change (Key remote)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the

device number included in the SUB STATUS.

This is echoed if [Parameter change ECHO] is ON.

When this is received, the same processing that is executed when the key speci-

fied by Address is pressed (released).

Transmission

If [Parameter Change ECHO] is ON, this message is retransmitted without

change.

2.8.3.23 Parameter change (Remote Meter)

When transmission is enabled by receiving a Request of Remote meter, the

specified meter information is transmitted every 50 msec for 10 seconds. When

you want to transmit meter information continuously, a Request must be trans-

mitted continuously within every 10 seconds.

Reception

This is echoed if [Parameter change ECHO] is ON.

Transmission

When transmission has been enabled by a Request, the parameter specified by

Address will be transmitted on the [Rx CH] channel at 50 msec intervals for a

duration of 10 seconds.

Transmission will be disabled if the power is turned off and on again, or if the

PORT setting is changed.

If [Parameter Change ECHO] is ON, this message is retransmitted without

change.

* Meter data uses the unmodified DECAY value of the DSP. The inter-

pretation of the data will depend on the parameter.

2.8.3.24 Parameter request (Remote Meter)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the

device number included in the SUB STATUS. This is echoed if [Parameter

change ECHO] is ON.

When this is received, data of the specified address is transmitted on the [Rx

CH] at intervals of 50 msec as a rule (although this may not be the case if the

port is being used by other communication), for a period of 10 seconds.

If Address UL= 0x7F is received, transmission of all meter data will be halted

immediately. (disable)

Transmission

If [Parameter Change ECHO] is ON, this message is retransmitted without

change.

2.8.3.25 Parameter change (Remote Time Counter)

When transmission is enabled by receiving a Request of Remote Time Counter,

the Time Counter data is transmitted every 50 msec for 10 seconds. When you

want to transmit Counter information continuously, a Request must be trans-

mitted within every 10 seconds.

Reception

This is echoed if [Parameter change ECHO] is ON.

Transmission

When transmission is enabled by receiving a Request, the Time Counter infor-

mation is transmitted on [RxCH] channel every 50 msec for 10 seconds.

Transmission will be disabled if the power is turned off and on again, or if the

PORT setting is changed.

If [Parameter Change ECHO] is ON, this message is retransmitted without

change.

2.8.3.26 Parameter request (Remote Time Counter)

Reception

This is received if [Parameter change RX] is ON and the [Rx CH] matches the

device number included in the SUB STATUS. This is echoed if [Parameter

change ECHO] is ON.

When this is received, the Time Counter information is transmitted on the [Rx

CH] channel every 50 msec for 10 seconds.

When the second byte of Address is received on 0x7F, data transmission will be

halted immediately. (disable)

Transmission

If [Parameter Change ECHO] is ON, this message is retransmitted without

change.

STATUS 11110000 F0

System exclusive message

ID No. 01000011 43

Manufacture’s ID number (YAMAHA)

SUB STATUS 0011nnnn 3n

n=0-15 (Device number=MIDI Channel)

GROUP ID 00111110 3E

MODEL ID (digital mixer)

MODEL ID 00001101 0D

01V96

ADDRESS 00010011 13

Library sort table

0000ffff 0f

Library type

EOX 11110111 F7

End of exclusive

STATUS 11110000 F0

System exclusive message

ID No. 01000011 43

Manufacture’s ID number (YAMAHA)

SUB STATUS 0001nnnn 1n

n=0-15 (Device number=MIDI Channel)

GROUP ID 00111110 3E

MODEL ID (digital mixer)

MODEL ID 00001101 0D

01V96

ADDRESS 00100000 20

Key remote

0kkkkkkk kk

Key address H

0kkkkkkk kk

Key address M

0kkkkkkk kk

Key address L

DATA 0ppppppp pp

Release:0, Press:1

EOX 11110111 F7

End of exclusive

STATUS 11110000 F0

System exclusive message

ID No. 01000011 43

Manufacture’s ID number (YAMAHA)

SUB STATUS 0001nnnn 1n

n=0-15 (Device number=MIDI Channel)

GROUP ID 00111110 3E

MODEL ID (digital mixer)

MODEL ID 00001101 0D

01V96

ADDRESS 00100001 21

Remote meter

0mmmmmmm mm

ADDRESS UL

0mmmmmmm mm

ADDRESS LU

0mmmmmmm mm

ADDRESS LL

DATA 0ddddddd dd

Data1 H

0ddddddd dd

Data1 L

EOX 11110111 F7

End of exclusive

STATUS 11110000 F0

System exclusive message

ID No. 01000011 43

Manufacture’s ID number (YAMAHA)

SUB STATUS 0011nnnn 3n

n=0-15 (Device number=MIDI Channel)

GROUP ID 00111110 3E

MODEL ID (digital mixer)

MODEL ID 00001101 0D

01V96

ADDRESS 00100001 21

Remote meter

0mmmmmmm mm

ADDRESS UL

0mmmmmmm mm

ADDRESS LU

0mmmmmmm mm

ADDRESS LL

0ccccccc ch

Count H

0ccccccc cl

Count L

EOX 11110111 F7

End of exclusive

STATUS 11110000 F0

System exclusive message

ID No. 01000011 43

Manufacture’s ID number (YAMAHA)

SUB STATUS 0001nnnn 1n

n=0-15 (Device number=MIDI Channel)

GROUP ID 00111110 3E

MODEL ID (digital mixer)

MODEL ID 00001101 0D

01V96

ADDRESS 00100010 22

Remote Time counter

0000tttt 0t

0:Time code, 1:Measure.Beat.Clock

0ddddddd dd

Hour / Measure H

0ddddddd dd

Minute / Measure L

DATA 0ddddddd dd

Second / Beat

0ddddddd dd

Frame / Clock

EOX 11110111 F7

End of exclusive

STATUS 11110000 F0

System exclusive message

ID No. 01000011 43

Manufacture’s ID number (YAMAHA)

SUB STATUS 0011nnnn 3n

n=0-15 (Device number=MIDI Channel)

GROUP ID 00111110 3E

MODEL ID (digital mixer)

MODEL ID 00001101 0D

01V96

ADDRESS 00100010 22

Remote Time counter

0ddddddd dd

0:Transmission request,

0x7F:Transmission stop request

EOX 11110111 F7

End of exclusive

Yamaha 01V96 version 2 Seite 319

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha 01V96 version 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info