Bedienungsanleitung Yamaha 01V96i (Seite 12 von 71) (Englisch)

517047

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

12 Control Surface & Rear Panel

01V96i—Owner’s Manual

ST IN Section

1 [ST IN] button

This button selects an ST IN channel pair (ST IN

Channels 1 & 2 or 3 & 4) which you can control

using the buttons and controls in the ST IN section.

The indicators to the right of the button indicate the

available ST IN channels.

2 [SEL] buttons

These buttons select the ST IN channel you want to

control.

3 [SOLO] buttons

These buttons solo the selected ST IN channels.

4 [ON] buttons

These buttons turn the ST IN channels on or off.

5 Level controls

These controls adjust the ST IN channel levels.

FADER MODE Section

1 [AUX 1]–[AUX 8] buttons

These buttons enable you to select the Aux Send

you wish to control. Pressing one of these buttons

switches the Fader mode (see page 22), and displays

the corresponding Aux page. (The selected button’s

indicator lights up.)

You can now adjust the send level of signals routed

from Input Channels to the corresponding Aux

buses by using the faders.

2 [HOME] button

This button recalls Meter pages that display Input

Channel levels or Output Channel (Bus Out, Aux

Out, Stereo Out) levels (see page 23).

DISPLAY ACCESS Section

1 [SCENE] button

This button displays a Scene page, enabling you to

store and recall Scenes.

2 [DIO/SETUP] button

This button displays a DIO/Setup page, enabling

you to set up the 01V96i, including digital input and

output setup and remote control setup.

3 [MIDI] button

This button displays a MIDI page, enabling you to

make MIDI settings.

4 [UTILITY] button

This button displays a Utility page, enabling you to

use the internal oscillators and view information

about installed optional cards.

5 [ /INSERT/DELAY] button

This button displays a /INS/DLY page, enabling

you to switch the signal phase, set the signal to be

inserted, or set the delay parameters.

6 [PAN/ROUTING] button

This button displays a Pan/Route page, enabling

you to select a Bus to which the selected channel

signal is routed, adjust the selected channel pan set-

tings, adjust the level of signals routed from Buses

1–8 to the Stereo Bus, and adjust the stereo or sur-

round pan settings.

7 [PAIR/GROUP] button

This button displays a Pair/Group page, enabling

you to create or cancel channel pairs and group

multiple channel faders or [ON] buttons.

8 [PATCH] button

This button displays a Patch page, enabling you to

patch input signals and Bus Out signals to Input

channels, or patch signals to the desired output con-

nectors.

9 [DYNAMICS] button

This button displays a Dynamics page, enabling you

to control channel gates and compressors.

SOLO

SEL SEL

ST IN

ST IN 1 ST IN 2

FADER MODE

AUX

HOME (METER)

DISPLAY ACCESS

DYNAMICS

EQ EFFECT VIEW

PATCH

UTILITYMIDISCENE

DIO/SETUP

/ INSERT/

DELAY

PAN/

ROUTING

PAIR/

GROUP

1 2 3

0 A B

UTILITYMIDISCENE

DIO/SETUP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 01V96i Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha 01V96i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info