Bedienungsanleitung Yamaha 01V96i (Seite 49 von 71) (Englisch)

517047

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

Troubleshooting 49

01V96i—Owner’s Manual

Troubleshooting

Power won’t turn on, panel LEDs or

LCD won’t light

❍ Are the LCD contrast and panel brightness set appropriately?

❍ Is the POWER switch turned on?

❍ If the power still does not turn on, contact a Yamaha service center listed at the

end of the manual.

Sound is not input

❍ Is the optional I/O card inserted correctly? (see page 18)

❍ Is the signal from the external device being input?

❍ Is the input port patched to an input channel? (see page 29)

❍ Is the GAIN set to an appropriate level? (see page 32)

❍ Is the EQ attenuator raised? (see page 35)

❍ Is an insert turned on even though it is not assigned correctly?

❍ Is the input channel’s [ON] key indicator lit?

❍ Is the input channel’s fader raised?

Sound is not output

❍ Is the optional I/O card inserted correctly? (see page 18)

❍ Is the STEREO channel’s [ON] key indicator lit?

❍ Is the output channel patched to an output port? (see page 31)

Sound is not output from

headphones or MONITOR OUT jacks

❍ Is the [PHONES] knob or [LEVEL] knob set to an appropriate volume?

Insufficient volume

❍ Is the GAIN set to an appropriate level? (see page 32)

❍ Is the input channel’s fader raised?

❍ Could the EQ gain be lowered excessively? (see page 35)

❍ Could the GATE/COMP threshold or ratio be set to an excessive value? (see

page 37)

❍ Is the EQ attenuator raised? (see page 35)

❍ Is the output channel’s fader raised?

❍ Check the levels in each screen of the METER function. (see page 23)

Sound is distorted

❍ Is the wordclock set correctly? (see page 27)

❍ Is the GAIN set to an appropriate level? (see page 32)

❍ Could the input channel’s fader be raised excessively?

❍ Could the STEREO channel’s fader be raised excessively?

❍ Could the EQ or COMP gain be raised excessively?

(see pages 35–37)

Sound is output even though not

patched to an output channel

❍ Could the input channel be set to direct out? (see page 33)

❍ Could insert out be assigned to the output channel?

Operating a fader does not change

the level as expected

❍ Are the correct channels selected in the LAYER section?

Only a specific channel is heard from

the MONITOR OUT or PHONES jack

❍ Could the [CUE] key be on?

Noise is present in an externally

connected recorder or device

❍ Is the wordclock set correctly? (see page 27)

❍ Could an unsynchronized signal be input?

❍ Is the oscillator turned on? (see page 45)

High-frequency range is lacking

❍ Could emphasis be applied? This will occur if the state of the input signal does

not match the emphasis data.

❍ Could EQ be applied? (see page 35)

An input signal is being input, but

there’s no monitor output

❍ Could DIMMER be applied?

❍ Is the routing appropriate for the signal you want to monitor?

Headroom is restricted, particularly

when EQ boost is applied

❍ Use the EQ’s attenuator to reduce the level. (see page 35)

Signal is delayed ❍ Check whether the delay of each channel is set correctly.

Can’t save scene memories or library

data

❍ Could you be attempting to save a read-only scene/library memory, or a pro-

tected scene? (see page 42)

Can’t transmit/receive MIDI data

❍ Is the MIDI PORT selected correctly?

❍ Are the MODE and channel selected correctly on the transmitting and receiving

devices?

❍ Have you assigned an event to the program change?

When a scene is recalled, some

channels/parameters do not update

❍ Could recall safe be specified for those channels/parameters?

When a scene is recalled, it takes time

for the faders to stop

❍ Could a fade time have been specified?

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 01V96i Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha 01V96i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info