Bedienungsanleitung Yamaha 01X (Seite 30 von 156) (Englisch)

48716

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Overview of the 01X

01X Owner’s Manual

Before Using Basics Section AppendixGetting Started Reference

Output channel

● Stereo output channel

This is a stereo output channel that processes the signals

sent from each channel to the stereo bus. Stereo faders con-

torl the level of these outputs. It provides a 4-band EQ and

dynamics processor identical to those provided on the

input channels. The output signal of the stereo output chan-

nel is sent via the output patch section to the various output

jacks, and is also simultaneously output to the MONITOR

OUT jacks and PHONES jack.

● Rec bus output channel

This is a stereo output channel that processes the signals

sent from each channel to the rec bus. It provides a four-

band EQ and dynamics processor identical to those pro-

vided on the input channels. The output signal of the rec

bus channel is sent via the master level/output patch sec-

tion to the various output jacks.

The master level of the rec bus can be controlled by using

the channel 1 fader when [MASTER] layer in the MIXER/

LAYER is seleced in Internal mode.

● AUX buses 1 through 4

The signals sent from each channel to AUX buses 1–6 pass

through a master level, and are sent to the output patch sec-

tion.

The master level of AUX buses 1 through 4 can be con-

trolled by using the channel faders 3 through 6 when

[MASTER] layer in the MIXER/LAYER is seleced in

Internal mode.

Getting Started (page 62)

Output patch Reference (page 90)

Output Patch is the section where output signals are

assigned to mLAN channels 1/2 through 23/24, DIGITAL

STEREO OUT jack, and STEREO/AUX OUT jack. The

following output signals can be selected.

• Stereo bus (The output signal of the stereo bus routed

through the stereo output channel.)

• Rec bus

•AUX bus 1/2

•AUX bus 3/4

• In general, these output signals can be assigned to any output jack or

output channel. For the STEREO OUT jacks and DIGITAL STEREO

OUT jacks, two adjacent odd-numbered/even-numbered signals will

always be assigned.

• The direct out setting for a speciﬁc channel is cancelled if the corre-

sponding output channel is assigned to stereo bus, rec bus or AUX

buses (page 90).

STEREO L

ATT

INSERT

STEREO (STEREO BUS) L

STEREO (STEREO BUS) R

AUX 1

AUX 2

AUX 3 (FX1)

AUX 4 (FX2)

4BAND EQ

DY-

NAMICS

DY-

NAMICS

(Gain Reduction)

LEVEL

BAL

METER

STEREO R

METER

*3 Studio Manager only

RECBUS (BUS) L

RECBUS (BUS) R

STEREO (STEREO BUS) L

STEREO (STEREO BUS) R

AUX 1

AUX 2

AUX 3 (FX1)

AUX 4 (FX2)

RECBUS L

DY-

NAMICS

DY-

NAMICS

(Gain Reduction)

METER

LEVEL

METER

INSERT

RECBUS R

*3 Studio Manager only

METER

AUX1(...4)

AUX 1

AUX 2

AUX 3 (FX1)

AUX 4 (FX2)

LEVEL

METER

-10dBV

STEREO/AUX OUT

DIGITAL STEREO OUT

COAXIAL

mLAN OUT

RECBUS

DIRECT OUT1-24

IEEE 1394

DITHER

STEREO

RECBUS

AUX1/2

AUX3/4

STEREO

RECBUS

AUX1/2

AUX3/4

SELECT

(OUT PATCH)

AUX1/2

AUX3/4

STEREO

SELECT

(OUT PATCH)

SELECT

(OUT PATCH)

*1 Wordclock 96kHz/88.2kHz : 16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 01X Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info