Bedienungsanleitung Yamaha 01X (Seite 81 von 156) (Englisch)

48716

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

01X Owner’s Manual

Recording/Playback/Remote Control

Before UsingBasics SectionAppendix Getting StartedReference

2) Adjust the send levels

q Select the desired audio channel.

Use the [SEL] buttons (and the BANK [</>] (Left/

Right) buttons, if necessary). Note that the display

windows in Cubase SX change as well — letting you

directly select the Channel Settings window for any

track.

• Only audio channels can be controlled from the 01X. MIDI chan-

nels (and MIDI effects) can be called up, but effect control is not

implemented. However, keep in mind that you CAN control EQ

and effects of the plug-in instruments (see below).

Controlling effects for plug-in instruments

•Even though the plug-in instruments (plug-in synthesizers, drum

machines, samplers, etc.) are technically MIDI instruments, their

audio signals are fair game for processing with the EQ and

effects. To control these from the 01X, use the BANK [

]

(Left/Right) buttons (if necessary) and the [SEL] buttons to select

the appropriate plug-in audio channel. (Make sure NOT to select

the normal MIDI track channel here.)

w Call up the Send parameters by pressing the [SEND]

button.

e From Page 1, use the knobs to adjust the effect send

level for each effect (1 - 8).

r If necessary, turn the desired effect on or off.

Call up Page 2 of the Send parameters with the DIS-

PLAY [ / ] (Up/Down) buttons, then use the corre-

sponding knob to turn the effect (1 - 8) for the channel

on or off.

Select other pages in the Send parameters with the

DISPLAY [ / ] (Up/Down) buttons and make the

appropriate settings as needed:

Page 3: Pre/Post

Page 4: FX bus

3) Change the effect settings

q Press the [EFFECT] button.

Each press of the [EFFECT] button toggles between

MFX (Master) and FX (Send).

w Use the channel 1 knob to select the desired effect, 1 -

The effect name is shown at the top of the LCD. If the

effect slot has no effect, “Off No Effect” is shown.

e Use the DISPLAY [ / ] (Up/Down) buttons to select

the effect parameter pages.

Some effects have few pages (3 or 4), others have

many. (Some effects, such as Steinberg Step Filter, fea-

ture several dozen parameter pages.)

r Use the knobs to adjust the parameters.

•You can also select plug-in instrument channels for audio pro-

cessing (EQ, and effects). (See the Hint above, “Controlling

effects for plug-in instruments.”)

•For ease in editing, you may want to call up the particular effect

edit window so that you can see the parameters in Cubase SX as

you tweak them. For the Send Effects, click the appropriate “e”

button in the right column of effects in the Channel Settings win-

dow. For the Master Effects, press F6, then click the appropriate

“e” button.

Level1 Level2 Level3 Level4 Level5 Level6 Level7 Level8

FX Send Full Kit Page:01/04

FXOn1 FXOn2 FXOn3 FXOn4 FXOn5 FXOn6 FXOn7 FXOn8

FX Send Full Kit Page:02/04

FX#1 On Karlette

Send FX1 Page:01/07

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 01X Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info