Bedienungsanleitung Yamaha 01X (Seite 85 von 156) (Englisch)

48716

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

01X Owner’s Manual

Function Tree/Function List

Before UsingBasics SectionAppendix Getting StartedReference

■ INTERNAL MODE [INTERNAL]

Knob

Function name/

settings

Explanation Prompt

pages

Block

diagram

SCENE MODE [SCENE] → DISPLAY [ / ]

(or [SCENE] → [SCENE] → [SCENE])

1 SCENE LIBRARY

– r

00 – 99

(Library number)

Determines the Library number. Preset Scene numbers and write-protected

Scenes are indicated by asterisks (*) in the display and cannot be changed (see

“Protect” on page 86). Library number 00 is read-only and contains the

default settings for all parameters. By using Recall (below) to call up this

Scene, you can restore all 01X settings to their initial default state. This Scene

can also be called up via an external device by sending an appropriate program

change message (according to the setting in Program Change Assign Table;

see page 94).

z – v (Title Edit)

Determines the title (name) of the Library Scene (page 36).

b RECALL

For calling up the selected Scene. When recalling a Scene, the corresponding

MIDI program change message is transmitted (page 94). The conﬁrmation

prompt can be turned on/off as desired. (See “Recall Conﬁrmation” on page

95.)

Ye s 65

n STORE

For saving 01X settings collectively as a Scene. A Scene contains mixing set-

tings and internal effect parameter settings for all channels, and is stored to

internal memory in the Scene Library. Up to 99 Scenes can be stored. The

conﬁrmation prompt can be turned on/off as desired. (See “Store Conﬁrma-

tion” on page 95.)

•You can turn write-protect on for speciﬁc important Scenes that you wish to

keep from inadvertently overwriting or deleting. (See “Protect” on page 86.)

•Any and all data in the destination Scene will be lost when executing

Store. Make sure to save and archive important data to computer using

the Studio Manager program (page 9).

Parameters stored in a Scene:

• All channel fader settings (level)

• Send level from each channel to Aux Outs 1 – 4

• Aux Outs 1 – 4, Level settings for Rec bus

• [ON] button settings for all channels

• Phase settings for all channels

• Attenuation settings for all channels

• Dynamics settings for all channels (excepting Stereo In)

• EQ settings for all channels

•Pan settings for all channels

• Bus Out settings for all channels

•Fader group and Mute group settings

•Pair settings for all channels

•Effect type and parameter settings for Effects 1 and 2

• Library number of currently used Input Patch Scene

• Library number of currently used Output Patch Scene

• If changes made to the Input Patch or Output Patch settings are not stored to

the Patch Library, Patch settings may not be appropriate when calling up the

stored Scene. This applies also when changing the Input Patch/Output Patch

data assigned to the Scene after the Scene has been stored.

Ye s 65

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 01X Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info