Bedienungsanleitung Yamaha 01X (Seite 99 von 156) (Englisch)

48716

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

01X Owner’s Manual

Function Tree/Function List

Before UsingBasics SectionAppendix Getting StartedReference

■ EQ LIBRARY (Common to 4 bands) (Selected Channel only)

(This can be called up by pressing the same EQ button twice in a row. For example: [EQ LOW] → [EQ LOW])

q – r

01 – 200

(Library number)

Determines the Library number. Preset EQ numbers (01 – 40; see page 115)

are indicated by asterisks (*) in the display and cannot be changed.

No 36

z – v (Title Edit)

Determines the title (name) of the EQ Library.

No 41

b RECALL

For calling up the selected EQ Library. The conﬁrmation prompt can be

turned on/off as desired. (See “Recall Conﬁrmation” on page 95.)

Ye s 54

n STORE

EQ settings are stored to internal memory in the EQ Library. Up to 160 set-

tings can be stored. The conﬁrmation prompt can be turned on/off as desired.

(See “Store Conﬁrmation” on page 95.)

•Any and all data in the Store destination will be lost when executing the

Store operation. Make sure to save and archive important data to com-

puter using the Studio Manager program (page 9).

Ye s 65

m CLEAR

This deletes the selected EQ Library.

Ye s

PAN [INTERNAL] → ([SELECTED CHANNEL]) → [PAN]

PAN/BALANCE

– i

(q)

L63 – CENTER – R63

Enables adjustment of the pan setting of the signals routed from the Input

Channels to the Stereo Bus. Pressing the [SEL] button of ST IN channels

repeatedly toggles between the left and right channels, for independent opera-

tion. You can also apply the pan setting to a pair of Bus channels. When the

Stereo Out (ST) is selected, it is used to set the balance.

No !1

RECBUS (REC bus assign)

– i

(e)

ON/--

When this is set to on, the corresponding input channel signal is sent to the

Rec Bus.

No @1

ST-BUS (Stereo bus assign)

– i

(r)

ON/--

When this is set to on, the corresponding input channel signal is sent to the

Stereo Bus.

No @1

PHASE

– i

(t)

NORMAL/REVERS

Switch the corresponding Input Channel phase. NORMAL indicates normal

phase, and REVERS indicates reversed phase. You can set the phase sepa-

rately for ST IN channel L/R or each channel in a channel pair. Pressing the

[SEL] buttons repeatedly toggles between L and R.

No 21 y

ON/OFF (Selected Channel only)

(u) ON/OFF

Determines whether the channel is on or off. The channel is muted with the

Off setting. This works in unison with the [ON] button on the panel.

No o

LEVEL (Selected Channel only)

(i)

∞

– +6.0

(BUS/AUX/ST:

∞

– +0.0)

Enables adjustment of the input level of the Input Channel signal and the out-

put level of the Output Channel. When the channel knob 8 is pressed, the level

is set to nominal (0dB). This works in unison with the channel fader on the

panel.

No !0

Knob

Function name/

settings

Explanation Prompt

pages

Block

diagram

[PAGE SHIFT] + DISPLAY [ / ]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 01X Seite 99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info