Bedienungsanleitung Yamaha 01X (Seite 104 von 156) (Englisch)

48716

104

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

104

Remote Function List

01X Owner’s Manual

Before Using Basics Section AppendixGetting Started Reference

Remote Function List

•For information and instructions on setting up the 01X for remote control, refer to the Getting Started and the section “Demo

Song Playback/Remote Control Setup” in the separate Installation Guide booklet.

•For information on the Remote functions of the Multi Part Editor, refer to the Multi Part Editor owner’s manual (PDF ﬁle).

• If necessary, set the display language for the DAW software to English (especially if letters are not displayed correctly).

Refer to the owner’s manual of your particular DAW for details.

• Depending on the speciﬁcations of the particular DAW, there may be a time lag in transmitting control data, and as a result,

the parameter value indications and LED indications on the 01X may not match the indications in the DAW. If this happens,

refresh the display by operating a knob or the BANK buttons. (Depending on the particular DAW, refreshing the indications

in this way may not be possible.)

■ SQ01 V2: (In the Track View window, select “Remote Control” from the Setup menu and set the Mode to “01X.”)

On the 01X, set Remote Select (page 87) in the Utility mode to “GENERAL.”

Button Function LED

Notes

(page 114)

In all modes:

[SHIFT]+[INTERNAL]

Exits from Remote mode, then starts Studio Manager.

—

[NAME/VALUE]

Changes the indication of the parameter name and its value.

—

[SHIFT]+[NAME/VALUE]

Changes the meter display mode.

—

DISPLAY [ / ]

Changes the parameter to be edited.

—

[SEL] (when [SEL] lamp ﬂashes)

Fader touch-out (page 15)

ﬂashes ➝

goes out

[SEL]

(when [AUTO EDIT] lamp is on)

Fader touch-in (page 15)

ﬂashes

[ON] (in normal status)

Turns each channel off or on (mutes/unmutes the signal).

lights/goes out *1

[SHIFT]+ [ON] of the Master Channel

(in normal status)

This sets all channels to the same off/on (mute/unmute) status as the master channel.

Pressing it again turns all channels on or off simultaneously. (Applies to the Channel

Module and Software Synthesizer Module.)

lights/goes out

[SHIFT] + [ON] of each channel

(in normal status)

This sets all channels (excepting the master channel) to the same off/on (mute/unmute)

status as the channel whose button was pressed. Pressing it again turns all channels

(excepting the master channel) on or off simultaneously. (Applies to the Channel Mod-

ule and Software Synthesizer Module.)

lights/goes out *1

[ON] (when [SOLO] lamp is on)

Turns the Solo function of each channel on or off. (Applies to the Channel Module/Soft-

ware Synthesizer Module.)

lights/goes out *2

[SHIFT]+[ON]

(when [SOLO] lamp is on)

This sets all channels (excepting the master channel) to the same Solo status as the chan-

nel whose [ON] button was pressed. Pressing it again turns Solo for all channels

(excepting the master channel) on or off simultaneously. (Applies to the Channel Mod-

ule and Software Synthesizer Module.)

lights/goes out *2

[ON]

([AUTO R/W] lights)

This switches the automation status for each channel in order: Off (unlit), Read (green),

Touch (orange) and Latch (red).

lights/goes out

[SHIFT]+[ON]

([AUTO R/W] lights)

This sets all channels to the same automation status as the channel whose [ON] button

was pressed. The settings are changed in order: Off (unlit), Read (green), Touch (orange)

and Latch (red).

lights/goes out

[AUTO EDIT]

Changes the function of the [SEL] button to the touch-in function. This button ﬂashes

during automation touch-in.

lights

[SOLO]

Changes the function of the [ON] button to the Solo function.

lights

[SHIFT]+[SOLO]

Determines the Solo/Mute settings of the selected tracks.

—

[SHIFT]+[REC RDY]

Determines the recording on or off settings of the selected tracks.

—

[AUTO R/W]

Changes the function of the [ON] button to the AUTO R/W function.

lights

[AUDIO]

Starts the Audio Mixer or moves the Audio Mixer Window to the front of the computer

screen. This button operation applies to the channel module.

lights

[INST]

Starts the Audio Mixer or moves the Audio Mixer Window to the front of the computer

screen. This button operation applies to the Software Synthesizer module.

lights

[MIDI]

Starts the MIDI Editor (such as the Multi Part Editor) or moves it to the front of the com-

puter screen.

lights *3

[BUS/AUX]

Displays the AUX/BUS window or brings it to the front of the computer screen (when

the Audio Mixer is active).

lights

[OTHER]

Starts the Audio Mixer or brings it to the front of the computer screen. This operation

applies to the Effect module.

lights *4

BANK [</ >]

Scrolls through the track indication every eight channels.

—

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 01X Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info