48716
113
Zoom out
Zoom in
Vorherige Seite
1/156
Nächste Seite
01X Owner’s Manual
Remote Function List
113
Before UsingBasics SectionAppendix Getting StartedReference
PAN mode [PAN] ( or [SHIFT]+[PAN] Knob) lights *26
Knobs 1 – 8 (turning)
For editing parameters.
Knobs 1 – 8 (pressing)
(Surround Audio Channel)
Enters the PANNER Effect Edit mode. Press the [EDIT] button to return to the PAN
mode.
[SHIFT]+Knobs 1 – 8 (pressing)
Resets the edited parameter to the default value (center).
[FLIP]
Switches the functions of the Channel Knobs and the Faders.
lights *37
[PAN] in the PAN mode
Turns the Meter on or off.
SndVal mode [SEND] ( or [SHIFT]+[PAN] Knob) *26
Knobs 1 – 8 (turning)
For editing parameters.
DISPLAY [ / ]
Cursor [ / ]
Changes the Send number.
*11
Knobs 1 – 8 (pressing)
Sets Mute to on or off.
[SHIFT]+Knobs 1 – 8 (pressing)
esets the parameter value to the default (0 dB).
[FLIP]
Switches the functions of the Channel Knobs and the Faders.
lights *37
[SEND] in the SndVal mode
Turns the Meter on or off.
SndOut mode [SHIFT]+[PAN] Knobs
DISPLAY [ / ]
Cursor [ / ]
Changes the Send number.
*11
Knobs 1 – 8 (turning)
Selects the bus for each Send of the track.
Knobs 1 – 8 (pressing)
(except when selecting a bus)
Switches between Send PRE and POST.
*26
Input mode [SHIFT]+[PAN] Knob
Knobs 1 – 8 (turning)
Selects an input bus for a track.
Output mode [SHIFT]+[PAN] Knob
Knobs 1 – 8 (turning)
Selects an output bus for a track.
Effect mode [SHIFT]+[DYNAMICS] ( or [SHIFT]+[PAN] Knob)
[DYNAMICS]
lights
*34
Knobs 1 – 8 (turning)
Selects a Plug-in Effect for each track.
DISPLAY [ / ]
Cursor [ / ]
Changes the Effect Number.
*11, 35
Knobs 1 – 8 (pressing)
Turns the Effect Bypass on or off. When the bus is turned on, X is indicated above the
Effect name.
*19
[EQ LOW]/[EQ LOW-MID]/
[EQ HIGH-MID]/[EQ HIGH]
+Knobs 1 – 8 (pressing)
Assigns the Parametric EQ to the corresponding track.
[EDIT] (when any track is selected)
Enters the Plug-in Effect Edit mode. Press [EDIT] again to exit from the Edit mode.
lights/goes out
*21, 27,
35
Effect Edit mode [SHIFT]+[PAN] Knob
[DYNAMICS]
[EDIT]
lights
*34
Knobs 1 – 8 (turning)
For editing parameters.
DISPLAY [ / ]
Cursor [ / ]
Changes an Effect Number.
*11
Cursor [ / ]
Calls up the Effect of a different track.
[SHIFT]+BANK [</>]
Changes the parameters to be edited with the Knobs in order one by one.
BANK [</>]
Changes the parameters to be edited with the Knobs in groups of eight.
[FLIP]
Switches the functions of the Channel Knobs and the Faders.
lights *37
Prefs mode [SHIFT]+[PAN] Knob
[DYNAMICS]
[EDIT]
lights
Knobs 1 – 8 (pressing)
• LvlMtr........ Turns the Meter indication on or off. (the same as [SHIFT]+[NAME/
VALUE])
• SrlTks ........ Determines whether the displayed tracks of the 01X and those of the mix-
ing board in Digital Performer are synchronized or not.
• FtSwtc........ Switches between the footswitch assignments: PLAY/REC, or F5/F6 (on
computer keyboard).
No function
[WRITE] [F1] – [F8] [SHIFT]+[F8]
Button Function LED
Notes
(page 114)
113

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha 01X wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info