Bedienungsanleitung Yamaha 01X (Seite 147 von 156) (Englisch)

48716

147

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Before UsingBasics SectionAppendix Getting StartedReference

01X Owner’s Manual

147

Troubleshooting

• There may be a limit on the IEEE 1394 interface of your com-

puter as to the number of ports that can be used simultaneously.

Check how many ports can be used simultaneously.

•Turn off all devices on the mLAN network (except the com-

puter) and re-connect each device one-by-one until the device

causing the problem is found.

•(For Windows) (When removing the mLAN bus from the

[Safely Remove Hardware] setting of the task bar.) Restart the

computer when using mLAN again.

•With Macintosh notebook computers such as the iBook and

PowerBook, always ﬁrst connect the 01X and mLAN cable

then turn on the power of the 01X, before starting up the com-

puter.

• Make sure that you set up the wordclock correctly. Also, make

sure that one node is assigned as master and the other nodes are

assigned as slaves.

........ “mLAN Connection Settings”

(Graphic Patchbay Online Manual)

■ The mLAN Driver (MIDI/Audio) is not

detected from the application (DAW, audio

sequencer, etc.).

•(For Windows) Make sure mLAN has not been turned off. On

the task bar, right-click mLAN Manager (mLAN icon), then

select ON.

........ “Conﬁrming the installation” (Installation Guide),

“mLAN Connection Settings” (Graphic Patchbay

Online Manual)

• Make sure the 01X is connected to the mLAN cable and is

powered on. Start mLAN Auto Connector or mLAN Graphic

Patchbay, then re-connect the device.

........ “Conﬁrming the installation” (Installation Guide),

“mLAN Connection Settings” (Graphic Patchbay

Online Manual)

•(For Macintosh) To use an iBook or PowerBook in the system,

connect the 01X to the Macintosh using an mLAN cable, turn

on the power to the 01X, then start the Macintosh.

• Make sure the mLAN settings are correct

........ “The mLAN connection does not work.”

■ The computer processing speed is too

slow.

■ The computer’s CPU meter indicates a

heavy processing load.

■ Playback response is delayed.

• Make sure your computer satisﬁes the system requirements.

........ “System Requirements” (Installation Guide)

•(For Windows) If you do not use the mLAN system, on the task

bar right-click mLAN Manager (mLAN icon), then select OFF

(mLAN quits).

........ “Conﬁrming the installation” (Installation Guide)

•Try reducing the number of audio channels in mLAN Auto

Connector or Graphic Patchbay.

........ “Connecting the Computer and mLAN devices via

mLAN” (Installation Guide), “mLAN Connection

Settings” (Graphic Patchbay Online Manual)

•Try increasing the latency value.

........ “Changing the Settings after Installation”

(Installation Guide)

•(For Macintosh) If a dual-CPU model awakes from Sleep or

Suspend mode, processing speed may be slowed. In this event,

restart the computer.

•(For Windows) Refer to “Hints when using

audio data (Windows).”

..............................Installation Guide

•(For Windows) The condition may improve if you set “Hyper

Threading” to “Disable.”

• Using mLAN Graphic Patchbay, try reducing the number of

devices connected to the computer.

.........“mLAN Connection Settings”

(Graphic Patchbay Online Manual)

•(For Macintosh) Turn off virtual memory.

•(For Macintosh) Disable Apple Talk.

■ Inconsistency in wordclock, or unable to

exit from Auto Connector

•(For Windows) Mobile computers with Intel CPU

SpeedStep™ technology is applied for some CPU’s (CPU for

notebook PC). Please disable the SpeedStep™ technology

when mLAN is employed. SpeedStep™ technology changes

CPU clock dynamically depending on the loading on the CPU

to save the power consumption.

•How to disable the SpeedStep™ technology;

In almost all of the PC’s, BIOS has a function to select

enabling or disabling the SpeedStep™ technology. Please

refer to the PC’s operating manual, or make inquiry to the

PC manufacturer.

■ Cannot close the applications or shut

down the computer (operating system).

■ Cannot change the mLAN settings.

■ Cannot uninstall (remove) mLAN Applica-

tions for YAMAHA (mLAN driver) or mLAN

Tools 2.0.

•(For Windows) Is the mLAN (WDM) driver selected as the

default audio device for the system?

• Select [Start | Control Panel | Sounds and Audio Devices |

Voice].

Make sure that something other than “mLAN Audio 01”

is selected for the [Voice playback] and [Voice recording]

settings.

• Select [Start | Control Panel | Sounds and Audio Devices |

Audio].

Make sure that something other than “mLAN Audio 01”

is selected for the [Sound playback] and [Sound record-

ing] settings.

• In “MIDI music playback,” select any option other than

the range of options from “mLAN MIDI Out” through

“mLAN MIDI Out (8).”

•(For Windows) Select [Start | Control Panel | Sounds and Audio

Devices | Sounds]. And select “No sounds” in the [Sound

scheme], then execute again.

•(For Windows) If you cannot quit mLAN (by selecting “OFF”

after right clicking the mLAN icon in the task bar), end the

processes listed below manually. ([Ctrl] + [Alt] + [Delete] ➝

[Processes] ➝ select process ➝ [End process]) When ﬁnished,

start mLAN Manager to change the mLAN settings again.

• mLANVDevice.exe

• mLANTFamily.exe

• mLANSoftPH.exe

• mLANManager.exe

Yamaha 01X Seite 147

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info