Bedienungsanleitung Yamaha 02R (Seite 336 von 354) (Englisch)

517050

336

Zoom out

Zoom in

Vorherige Seite

1/354

Nächste Seite

Glossary 225

Digital Recording Console 02R User’s Guide

Glossary

A/D converter – The conversion of analog signals into digital signals. The

analog signal is sampled every few milliseconds and its level is quantized

into a digital word. The larger the digital word, the more accurate the

representation of the analog value. See Quantization and Sampling frequency.

The 02R uses 20-bit linear analog-to-digital converters for most of its analog

inputs.

Aliasing – A form of distortion which can occur during the conversion of

analog signals into digital. If the input signal is more than one half the

sampling rate, only portions of the signal will be present when the system

samples the waveform. A false image of the waveform, based on the

components that were actually sampled, is created.

A system which samples at 48 kHz can correctly process signals of up to

24 kHz. To remove signals above the Nyquist frequency (see Nyquist

Sampling Theorem), all A/D converters employ anti-aliasing ﬁlters. The 02R

employs over-sampling A/D converters to allow the anti-aliasing ﬁlter to

be performed in the digital domain. See over-sampling.

Attenuation – After the signal has been converted to digital, the 02R can

apply numerous forms of signal processing, such as equalization or effects.

Some of these processes may boost the signal to digital clipping. The 02R

allows you to attenuate the digital signal to reduce the chances of clipping.

Automation system – The 02R has an on-board automation system that

memorizes fader positions, switches individual channels on or off, adjusts

the equalization or pan positions, and changes the auxiliary sends – all

based on timecode. It can recall scene memories and programs from the

equalizer, effects, dynamics, and channel libraries, also determined by the

recorded timecode. You can record an entire mixing session, and then edit

the individual channel settings in multiple passes. You can punch-in to ﬁne

tune a speciﬁc parameter or you can use one of the event editors to adjust

the timecode position of channel settings or scene and library changes.

Automix Memory – The automation system records each parameter

change and the associated time as an event. The parameters that are

recorded include fader movements, channel status and equalizer changes,

and library recalls. The more complicated the mix, the more memory it

consumes. The 02R has a default of 512 kbytes of automation memory.

Auxiliary send – The auxiliary sends are used to feed signals from the

input or tape return channels to external effects processors, ampliﬁers, or

multitrack recording equipment. The 02R has eight auxiliary sends. Two of

the sends feed the internal effects processors. See Internal Effects.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 02R Seite 336

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha 02R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info