Bedienungsanleitung Yamaha 02R96VCM (Seite 28 von 350) (Englisch)

559199

Zoom out

Zoom in

Vorherige Seite

1/350

Nächste Seite

28 Chapter 2—Control Surface & Rear Panel

02R96 Version 2—Owner’s Manual

PAN/SURROUND

A PAN/SURROUND DISPLAY button

This button is used to select the Input Channel Pan pages, the Surround Mode page, and

the Surround Edit pages. See “Panning Input Channels” on page 83 and “Using Surround

Pan” on page 85.

B L & R buttons

These buttons can be used to select horizontally or vertically partnered Input or Output

Channels. They can be used to select the left and right channels when the Stereo Out is

selected. For Input Channels, in Individual Pan mode, the [L] button indicator lights up

when an odd/left channel is selected; the [R] button indicator, when an even/right channel

is selected. In Gang or Inverse Gang Pan mode, the button indicator of the other channel in

the pair ﬂashes while its partner is selected.

C PAN display

This 10-segment display indicates the pan position of the currently selected Input Channel.

When pan is set to center, the center two segments light up. When the Stereo Out is selected,

it displays the balance.

D PAN control

This rotary control is used to pan the currently selected Input Channel. When the Stereo

Out is selected, it is used to set the balance. For Input Channels in Gang or Inverse Gang

Pan mode, horizontally or vertically paired Input Channels are panned simultaneously. See

“Panning Input Channels” on page 83 and “Balancing the Stereo Out” on page 94.

E LINK button

This button, which is enabled only when a Surround mode other than Stereo is selected, is

used to link the PAN control and the Joystick so that either control can be used for normal

and surround panning. It’s a global setting that applies to all Input Channels. Its indicator

lights up when the PAN control and Joystick are linked. If the Joystick is set to control effects

(i.e., the [EFFECT] button indicator is lit), this button is disabled. See “Panning Input

Channels” on page 83 and “Using Surround Pan” on page 85 for more information.

F GRAB button

This button is used to turn on and off Joystick control for the currently selected Input Chan-

nel. Its indicator lights up when Grab is on. When Grab is on, the Joystick can be used to

control the currently selected Input Channel’s surround pan position. When turned off, the

Joystick does not control surround pan. In Stereo mode, it controls the currently-selected

Input Channel’s pan position. If the PAN control and the Joystick are linked (i.e., the

[LINK] button indicator is lit), Grab is turned off if the PAN control is adjusted. If the Joy-

stick is set to control effects (i.e., the [EFFECT] button indicator is lit), this button is dis-

abled.

G EFFECT button

This button is used to select the Joystick for parameter control of the Reverb 5.1 effect. Its

indicator lights up when Reverb 5.1 effect control is on, and the Joystick cannot be used for

surround panning. See “REVERB 5.1” on page 276 for more information.

LINK GRAB EFFECT

EVEN

PAN/SURROUND

DISPLAY

ODD

234567

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 02R96VCM Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha 02R96VCM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info