Bedienungsanleitung Yamaha 02R96VCM (Seite 41 von 350) (Englisch)

559199

Zoom out

Zoom in

Vorherige Seite

1/350

Nächste Seite

Rear Panel 41

02R96 Version 2—Owner’s Manual

H 2TR IN DIGITAL COAXIAL 2 & 3

These phono connectors accept consumer format (IEC-60958) digital audio, and are typi-

cally used to connect the digital stereo outputs of 2-track recorders. Signals connected here

can be monitored via the CONTROL ROOM MONITOR OUT by pressing the CONTROL

ROOM [2TR D2] or [2TR D3] button. In addition, these inputs can be patched to Input

Channels or Insert Ins. Unsynchronized digital audio signals can be converted by the inter-

nal sampling rate converters. See “2TR Digital Ins” on page 58 for more information.

I 2TR IN DIGITAL AES/EBU 1

This XLR-3-31-type connector accepts AES/EBU format digital audio, and is typically used

to connect the digital stereo output of a 2-track recorder. Signals connected here can be

monitored via the CONTROL ROOM MONITOR OUT by pressing the CONTROL

ROOM [2TR D1] button. In addition, this input can be patched to Input Channels or

Insert Ins. Unsynchronized digital audio signals can be converted by the internal sampling

rate converters. See “2TR Digital Ins” on page 58 for more information.

J WORD CLOCK OUT connector

This BNC connector outputs a wordclock signal at the same clock rate as the 02R96. See

“Wordclock Connections” on page 55 for more information.

K WORD CLOCK 75Ω ON/OFF termination switch

This switch applies 75Ω termination to the WORD CLOCK IN. See “Terminating External

Wordclocks” on page 57 for more information.

L WORD CLOCK IN connector

This BNC connector is for connecting an external wordclock signal. See “Selecting the

Wordclock Source” on page 56 for more information.

M CONTROL port

This 25-pin D-sub connector provides access to the GPI (General Purpose Interface)

through which external equipment can be triggered when speciﬁed 02R96 faders or USER

DEFINE KEYS are operated. It can also be used to control a “RECORDING” light outside

of a studio, to trigger the Solo function of an 02R Digital Recording Console, or to turn on

Talkback from an external device. See “GPI (General Purpose Interface)” on page 225 for

more information.

N METER port

This 15-pin D-sub connector is for connecting the optional MB02R96 Peak Meter Bridge.

O MIDI IN, OUT & THRU ports

These standard MIDI IN, OUT, and THRU ports are used to connect the 02R96 to other

MIDI equipment. Supported MIDI messages include Program Changes for Scene recall,

Control Changes and Parameter Changes for real-time parameter control, Bulk Dump for

data storage, MIDI Clock, MTC, and MMC. See “MIDI I/O” on page 190 for more infor-

mation.

P CASCADE IN & OUT ports

These 64-pin connectors can be used to cascade up to four 02R96s to create a multiple-unit

mixing system. The 02R96 can also be cascaded with an 02R Digital Recording Console. See

“Cascading Consoles” on page 63 for more information.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 02R96VCM Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha 02R96VCM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info