517061
10
Zoom out
Zoom in
Vorherige Seite
1/89
Nächste Seite
02R Applications 5
Yamaha 02R & 03D Applications Guide
02R
Part 1: 02R Applications
System Operating Notes
02R
02R interface cards must be screwed securely in place. Do not leave the screws out after
installation as the cards will not be grounded correctly.
If a crackling noise can be heard, make sure not more than one device is set to internal
wordclock. One device should be set for internal wordclock (master) and all other
devices should be set to external wordclock (slave).
To see the version number of an 02R, hold down the UTILITY button while turning on
the 02R.
02R Cascade
In a cascaded 02R system, the ID parameter on the Cascade Configuration display must
be set correctly. The setting determines the amount of delay compensation. The ID
parameter is available only when a CD8-CS Cascade card is installed. The ID on the first
02R in a cascade system does not need to be set. In fact, because the IN/OUT switch on
the Cascade card in the first 02R is set to OUT, the ID parameter cannot be set. The next
02R should be set to ID 1, the next to ID 2, and the last to ID 3, as shown below.
The CD8-CS Cascade kit contains two CD8-CS cards and one 25-pin straight cable.
ADAT
To use the ADAT’s DIGITAL INPUT, press the DIGITAL IN button on the ADAT. Do not
press the DIGITAL I/O button on the BRC.
Set the DIGITAL I/O button on the BRC to OFF. This function is for direct ping-pong
between multiple ADATs. If this is turned ON while connected to an 02R, bus
assignments will produce unexpected results. Press the DIGITAL IN button on the
ADAT to use the DIGITAL INPUT.
To check the ADAT wordclock source, press the SET LOCATE and DIGITAL IN buttons
together. The display will show “int” for internal or digi” for external.
The sampling rate of an ADAT can be set to either 48 kHz or 44.1 kHz. Use Fixed mode
for 48 kHz and Variable mode for 44.1 kHz (using the PITCH DOWN button, set to
–146 cents. At which point 44.1 appears on the display). The newer ADAT-XT has
dedicated switches for selecting these two sampling rates.
02R-A
ID=0
02R-B
ID=1
02R-C
ID=2
02R-D
ID=3
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha 03D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha 03D

Yamaha 03D Bedienungsanleitung - Deutsch - 307 seiten

Yamaha 03D Bedienungsanleitung - Holländisch - 302 seiten

Yamaha 03D Bedienungsanleitung - Französisch - 300 seiten

Yamaha 03D Bedienungsanleitung - Italienisch - 301 seiten

Yamaha 03D Bedienungsanleitung - Portugiesisch - 141 seiten

Yamaha 03D Bedienungsanleitung - Spanisch - 315 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info