48722

Yamaha A4000 Seite 260

260
Zoom out
Zoom in
Vorherige Seite
1/296
Nächste Seite
Effect Parameter List
260 Appendix • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
13: RADIO
1 Noise Level 0 — 127 Degree of noise modulation
2 Tone 0 — 127 Tone of noise modulation
3 Mod LPF Frequency 1.0kHz — 18.0kHz, thru Frequency at which the low pass filter will cut the high range
4 Mod LPF Resonance 1.0 — 12.0 Resonance of low pass filter
5 HPF Frequency thru,22Hz — 8.0kHz Frequency at which the high pass filter will cut the low range
6 LPF Frequency 1.0kHz — 18.0kHz, thru Frequency at which the low pass filter will cut the high range
7 Dry/Wet Balance D63>W — D=W — D<W63 Balance between dry sound and effect sound
14: DIGITAL TURNTABLE
1 Click Density 0 — 5 Frequency with which the click sounds will occur
2 Click Level 0 — 127 Level of the click sounds
@3 Noise Tone 0 — 6 Tone of noise
4 Noise Mod Speed 0.00Hz — 39.7Hz Amplitude modulation frequency of the noise
5 Noise Mod Depth 0 — 127 Amplitude modulation depth of the noise
6 Dry Send to Noise 0 — 127 Mixture of dry signal into the noise
7 Noise LPF Freq 1.0kHz — 18.0kHz, thru Frequency at which the low pass filter will cut the high range
8 Noise LPF Q 1.0 — 12.0 Low pass filter resonance
9 Noise Level 0 — 127 Noise level
10 Dry LPF Frequency 1.0kHz — 18.0kHz, thru Frequency at which the low pass filter will cut the high range
11 Dry Level 0 — 127 Level of the dry sound
15: LOFI
1 SamplingFreq Ctrl 44.1kHz — 344Hz Selects the sampling frequency
2 Word Length 1 — 127 Sets the sound’s “roughness”
3 Output Gain -6dB — +36dB Output gain
@4 Filter Type thru,PowerBass,Radio,Telephone,Clean,Low Selects the type of sound
5 PreLPF CutoffFreq 63Hz — 18.0kHz, thru Frequency at which the low pass filter will cut the high range
6 PreLPF Resonance 1 — 12.0 Adds character to the input low-pass filter
7 Emphasis off/on Changes the high-frequency characteristics
8 Bit Assign 0 — 6 Adjusts the effect of the Word Length
9 Input Mode mono/stereo Mono/stereo input mode selection
10 Dry/Wet Balance D63>W — D=W — D<W63 Balance between dry sound and effect sound
16: LOW PASS FILTER, 17: HIGH PASS FILTER
1 Cutoff Freq 32Hz — 18.0kHz Specifies the filter cutoff frequency
2 Q 0 — 113 Sets the Q
@3 Filter Type -48dB, -24dB Selects the filter type
4 Q Type x1, x2 Selects the Q type
5 Output Gain -12dB — +12dB Output level
Noise may be produced with some voices when the “1. Cutoff Freq” is varied rapidly.
18: BAND PASS FILTER
1 Cutoff Freq 32Hz — 18.0kHz Specifies the filter cutoff frequency
2 Band Width 1 — 32 Sets the filter bandwidth
3 Q 0 — 113 Sets the Q
4 Output Gain -12dB — +12dB Output level
Noise may be produced with some voices when the “1. Cutoff Freq” is varied rapidly.
19: AUTO WAH + DIST, 20: AUTO WAH + OVERDRIVE
1 LFO Frequency 0.0Hz — 39.70Hz Frequency at which the wah filter will be controlled
2 LFO Depth 0 — 127 Depth at which the wah filter will be controlled
3 Cutoff Freq Offset 0 — 127 Offset value for the wah filter control frequency
4 Resonance 1 — 12.0 Bandwidth of the wah filter
5 Drive 0 — 127 (Distortion) Degree of distortion
6 PostDrive EQ Low -12dB — +12dB (Distortion) Gain by which the EQ will boost/cut the low range
7 PostDrive EQ Mid -12dB — +12dB (Distortion) Gain by which the EQ will boost/cut the mid range
8 PostDrive LPF Freq 1.0kHz — 18.0kHz, thru (Distortion) Frequency at which the filter will cut the high range
9 Drive Output Level 0 — 127 (Distortion) Output level
10 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
11 EQ Low Gain -12dB — +12dB Amount of gain by which the EQ will boost/cut the low range
12 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
13 EQ High Gain -12dB — +12dB Amount of gain by which the EQ will boost/cut the high range
14 Dry/Wet Balance D63>W — D=W — D<W63 Balance between the dry sound and effect sound
21: TOUCH WAH + DIST, 22: TOUCH WAH + OVERDRIVE
1 Sensitive 0 — 127 Sensitivity at which the wah filter will change in response to the input level
2 Cutoff Freq Offset 0 — 127 Offset value for the wah filter control frequency
3 Resonance 1 — 12.0 Bandwidth of the wah filter
4 Drive 0 — 127 (Distortion) Degree of distortion
5 PostDrive EQ Low -12dB — +12dB (Distortion) Gain by which the EQ will boost/cut the low range
6 PostDrive EQ Mid -12dB — +12dB (Distortion) Gain by which the EQ will boost/cut the mid range
7 PostDrive LPF Freq 1.0kHz — 18.0kHz, thru (Distortion) Frequency at which the filter will cut the high range
8 Drive Output Level 0 — 127 (Distortion) Output leve
9 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
10 EQ Low Gain -12dB — +12dB Amount of gain by which the EQ will boost/cut the low range
11 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
12 EQ High Gain -12dB — +12dB Amount of gain by which the EQ will boost/cut the high range
13 Dry/Wet Balance D63>W — D=W — D<W63 Balance between the dry sound and effect sound
… 260 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha A4000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha A4000

Yamaha A4000 Bedienungsanleitung - Deutsch - 296 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info