Bedienungsanleitung Yamaha A4000 (Seite 271 von 296) (Englisch)

48722

271

Zoom out

Zoom in

Vorherige Seite

1/296

Nächste Seite

Troubleshooting

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● A5000/A4000 • Appendix 271

Troubleshooting

If you experience problems such as “no sound” or “incorrect pitch,” refer to this section and make sure that the A5000/A4000

and your other equipment has the correct settings.

No sound

• Is the power of the A5000/A4000 and your external equipment turned on?

• Are MIDI cables and audio cables connected correctly between the A5000/A4000 and the external

equipment? (page 20 — 26)

• Is the MASTER VOL knob raised? (page 10)

When there is a problem with the program settings

• Is the program setting RchASSIGN set to other than off for the desired sample in memory? (page

94)

• In the EASY EDIT settings, have you modiﬁed the sample keyboard range or velocity range. (page

99 — 100)

• Are the effect settings Input Level or Output Level set to 0? (page 104)

• Is Program Level set to 0? (page 90)

• If an external controller has been set to control program level, is that controller in the 0 position?

(page 110)

When there is a problem with the sample settings

• Are the key range settings Low and High set correctly? (page 127)

• Are the velocity range settings Low and High set correctly? (page 131)

• Is Sample Level set to 0? (page 127)

• Is a setting other than off selected for Output1 or Output2? (page 129)

• Is the Output Leve1 or Output Level2 parameter set to “0”? (page 129)

• For some samples, strongly applying a ﬁlter may mean that the sound cannot be heard at all. (page

133)

• Is the AEG Attack Rate set to an extremely low value? (page 137)

• Is the MIDI receive channel of the sample set correctly? (page 145)

• If an external controller has been set to control sample level, is that controller in the 0 position?

(page 146)

Pitch is incorrect

• Has the pitch bend wheel of an external MIDI device been moved?

When there is a problem with the program settings

• Is Transpose set to a value other than 0? (page 90)

• If you are using a sample for which portamento is “=Pgm,” is the portamento Rate set extremely

low (or is the Time extremely high)? (page 92)

When there is a problem with the sample settings

• Is Original Key set correctly? (page 128)

• Are Pitch Coarse and Pitch Fine set correctly? (page 129)

• Is Fixed Pitch turned on? (page 130)

• Is Random Pitch set to a setting other than 0? (page 130)

• Is the Pitch EG set? (page 140)

• If an external controller has been set to control the Pitch Bias of a sample, is that controller raised

(or lowered) ? (page 146)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha A4000 Seite 271

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha A4000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info