Bedienungsanleitung Yamaha A4000 (Seite 273 von 296) (Englisch)

48722

273

Zoom out

Zoom in

Vorherige Seite

1/296

Nächste Seite

Error Messages

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● A5000/A4000 • Appendix 273

Error Messages

Here is a list of the error messages that will appear when an incorrect operation is performed or when a setting is incorrect.

Audio CD is required. An audio CD is not loaded into the external CD-ROM drive.

Audition requires more memory. There is not enough wave memory available to use the AUDITION function. Direct playback from the disk is

not possible.

Bulk data error. Processing of a bulk dump failed.

Bulk protect switch is ON. Bulk data or a SCSI message was received when the bulk protect switch was “on.”

Cannot copy Volume to FD. Cannot copy a volume unit to a ﬂoppy disk.

Cannot create sample (>16MW). An attempt was made to create a sample larger than 16 Mwords (32 megabytes).

Cannot ﬁnd associated ﬁle. The voice ﬁle associated with the voice data could not be located.

Cannot ﬁnd disk. Not ready for disk operation.

Cannot ﬁnd CD-R. Cannot prepare the CD-ROM drive for operation.

Cannot ﬁnd ﬁle. The speciﬁed ﬁle does not exist.

Cannot ﬁnd SCSI or IDE disk. SCSI or IDE disk could not be found.

Cannot revert this sample. The revert function cannot be used with newly created samples which have not been saved or imported

samples.

Cannot write to this disk. An attempt has been made to write to an unwriteable CD-ROM or other disk.

CD-R size overﬂow. The data to be written exceeds the capacity of the CD-R disk.

DIG or OPT signal input is required. No digital signal is present at the DIGITAL IN or OPTICAL IN terminal.

Disk drive is not ready. The disk is not ready for saving or loading.

Disk is duplicated in list. Duplicate backup source disks have been speciﬁed.

Disk is not formatted. The disk is not formatted for the A5000/A4000.

Disk is write protected. The disk is write protected, and writing could not be performed.

Disk read/write error. An error occurred while reading or writing to/from disk.

File is being accessed. You attempted to access a ﬁle which was undergoing some type of processing.

MIDI buffer is full. The A5000/A4000’s processing was not able to keep up with MIDI input.

MIDI is busy. You attempted to execute a bulk dump from the front panel while a bulk dump or parameter change etc.

was being processed.

MIDI receive error. A MIDI receive error occurred.

Name already exists. A ﬁle on disk or in memory with the speciﬁed name already exists.

Non-existent track or index. The audio CD loaded into the external CD-ROM drive does not have the speciﬁed track number or index

number.

Not enough disk area or

too many items.

There is not enough disk space to complete the operation, or the total number of samples/sample banks

which can be saved to disk has been exceeded.

Param memory full or

too many samples.

The operation cannot be completed because not enough parameter memory is available, or the number of

samples, sample banks, etc., which can be retained in memory has been exceeded.

Please set device number. Transmission or reception of bulk data was attempted with the device number turned off.

Sample Bank is selected in list. Sample banks cannot be written to an audio CD.

Sample processing failed. When executing a waveform processing command, the speciﬁed command could not be executed due to

insufﬁcient free space in the work area of wave memory, or for some other reason.

SIMM conﬁguration error. The A5000/A4000 was not able to start up, due to the fact that expansion SIMM’s are not installed in pairs,

or because the usage order of the expansion slots is incorrect etc.

SCSI terminator or device error. A SCSI error has occurred. Check terminators and connections and try again.

Some samples are copy protected. You have attempted to export or write copy-protected samples to an audio CD.

Too many samples. The operation cannot be completed because the number of target samples is too great. Up to 128 samples

can be arranged at one time, and the maximum number of samples that can be contained in a sample

bank is 127.

Too many takes. The sample could not be created, either because the maximum number of 64 was exceeded when consec-

utively recording with New+, or because an identically-named sample already exists.

Try physical format. Logical formatting failed. Try physical formatting.

Unknown disk or ﬁle format. Either the contents of the ﬁle have been damaged, or it is the wrong format.

Unsupported ﬁle format. The ﬁle is corrupted, or has an unsupported format.

Unsupported ﬁle name. The ﬁle name could not be detected by the A5000/A4000.

Unsupported sampling frequency. Samples that do not have a 44.1 kHz sampling rate cannot be written to an audio CD.

Veriﬁcation error. A veriﬁcation error occurred while writing to disk.

Wave memory error. An error occurred in wave memory.

Wave memory full. The speciﬁed command could not be executed due to insufﬁcient free space in wave memory.

Yamaha A4000 Seite 273

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha A4000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info