•Before beginning installation, switch off the power to the A5000/A4000 and con-
nected peripherals, and unplug them from the power outlet. Then remove all cables
connecting the A5000/A4000 to other devices. (Leaving the power cord connected
while working can result in electric shock. Leaving other cables connected can
interfere with work.)
•Do not disassemble, modify, or apply excessive force to board areas and connectors
on option boards, hard disk, ZIP drive, and SIMMs. Bending or tampering with
boards and connectors may lead to electric shock, fire, or equipment failures.
CAUTION
•Before handling an option board, hard disk, ZIP drive, or SIMM, you should briefly
touch the A5000/A4000 metal casing (or other such metallic area) with your bare
hand so as to drain off any static charge from your body. Note that even a slight
amount of electrostatic discharge may cause damage to these components.
•It is recommended that you wear gloves to protect your hands from metallic projec-
tions on the A5000/A4000, hard disk, SIMMs, ZIP drive, option boards, and other
components. Touching leads or connectors with bare hands may cause finger cuts,
and may also result in poor electrical contact or electrostatic damage.
•Take care to avoid dropping screws into the A5000/A4000 unit. If a screw does fall
in, be sure to remove it before you reassemble and power up the unit. Starting the
unit with a loose screw inside may lead to improper operation or equipment failure.
(If you are unable to retrieve a dropped screw, consult your Yamaha dealer for
advice.)
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep these precautions in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-
circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
•Do not open the instrument or attempt to disassemble the internal parts or modify
them in any way. The instrument contains no user-serviceable parts. If it should
appear to be malfunctioning, discontinue use immediately and have it inspected by
qualified Yamaha service personnel.
•Do not expose the instrument to rain, use it near water or in damp or wet conditions,
or place containers on it containing liquids which might spill into any openings.
•If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of
sound during use of the instrument, or if any unusual smells or smoke should
appear to be caused by it, immediately turn off the power switch, disconnect the
electric plug from the outlet, and have the instrument inspected by qualified Yamaha
service personnel.
•Only use the voltage specified as correct for the instrument. The required voltage is
printed on the name plate of the instrument.
•Always connect the three-pin attachment plug to a property grounded power source.
(For more information about the main power supply, see “Power Connection”.)
•Before cleaning the instrument, always remove the electric plug from the outlet.
Never insert or remove an electric plug with wet hands.
•Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instru-
ment or other property. These precautions include, but are not limited to, the following:
•Do not place the power cord near heat sources such as heaters or radiators, and do
not excessively bend or otherwise damage the cord, place heavy objects on it, or
place it in a position where anyone could walk on, trip over, or roll anything over it.
•When removing the electric plug from the instrument or an outlet, always hold the
plug itself and not the cord. Pulling by the cord can damage it.
•Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the out-
let.
•Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.
•Before connecting the instrument to other electronic components, turn off the power
for all components. Before turning the power on or off for all components, set all
volume levels to minimum. Also, be sure to set the volumes of all components at
their minimum levels and gradually raise the volume controls while playing the
instrument to set the desired listening level.
•Do not expose the instrument to excessive dust or vibrations, or extreme cold or
heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent
the possibility of panel disfiguration or damage to the internal components.
•Do not use the instrument near other electrical products such as televisions, radios,
or speakers, since this might cause interference which can affect proper operation of
the other products.
•Do not place the instrument in an unstable position where it might accidentally fall
over.
•Before moving the instrument, remove all connected cables.
•When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, sol-
vents, cleaning fluids, or chemical-impregnated wiping cloths. Also, do not place
vinyl, plastic or rubber objects on the instrument, since this might discolor the panel
or keyboard.
•Do not rest your weight on, or place heavy objects on the instrument, and do not use
excessive force on the buttons, switches or connectors.
•Do not place objects in front of the instrument’s air vent, since this may prevent ade-
quate ventilation of the internal components, and possibly result in the instrument
overheating. To ensure adequate ventilation and cooling, leave at least 10cm of open
space behind the A5000/A4000 rear panel, and at least 4cm of open space above the
top cover.
•Do not operate the instrument for a long period of time at a high or uncomfortable
volume level, since this can cause permanent hearing loss. If you experience any
hearing loss or ringing in the ears, consult a physician.
■ SAVING USER DATA
•To protect against data loss caused by malfunction or operating error, be sure to
save your data regularly to floppy disk, hard disk or other strage medium.
Yamaha cannot be held responsible for damage caused by improper use or modifi-
cations to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
(2)-6
*Consult your Yamaha dealer if you have any questions regarding installation procedures for options boards, hard disks, SIMMs, or other optional devices.
*If SIMM memory, hard disk, ZIP drive, or other optional component fails to work properly, consult the item's dealer for advice.
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Yamaha A5000 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.