48724

Yamaha AN1X Seite 130

130
Zoom out
Zoom in
Vorherige Seite
1/138
Nächste Seite
| | |------USER SEQ F0H 43H 0nH 5CH bbH bbH 01H aaH 00H ddH.....ddH ccH F7H
| | |------CURRENT VOICE F0H 43H 0nH 5CH bbH bbH 10H 00H 00H ddH.....ddH ccH F7H
| | |------CURRENT SEQ F0H 43H 0nH 5CH bbH bbH 10H 0EH 00H ddH.....ddH ccH F7H
| | |------CURRENT SCENE1 F0H 43H 0nH 5CH bbH bbH 10H 10H 00H ddH.....ddH ccH F7H
| | |------CURRENT SCENE2 F0H 43H 0nH 5CH bbH bbH 10H 11H 00H ddH.....ddH ccH F7H
| | |[SW5]-CURRENT SCENE_CTRL F0H 43H 0nH 5CH bbH bbH 10H 12H 00H ddH.....ddH ccH F7H
| | |------USER VOICE F0H 43H 0nH 5CH bbH bbH 11H aaH 00H ddH.....ddH ccH F7H
|| |
| | | <PARAMETER CHANGE>
| | |------DX1 MASTER TUNING F0H 43H 1nH 04H 40H ddH F7H
| | |------SYSTEM F0H 43H 1nH 5CH 00H 00H aaH ddH.....ddH F7H
| | |------CURRENT VOICE F0H 43H 1nH 5CH 10H 00H aaH ddH.....ddH F7H
| | |------CURRENT VOICE_SEQ F0H 43H 1nH 5CH 10H 0EH aaH ddH.....ddH F7H
| | |------CURRENT SCENE1 F0H 43H 1nH 5CH 10H 10H aaH ddH.....ddH F7H
| | |------CURRENT SCENE2 F0H 43H 1nH 5CH 10H 11H aaH ddH.....ddH F7H
| | |[SW5]-CURRENT SCENE_CTRL F0H 43H 1nH 5CH 10H 12H aaH ddH.....ddH F7H
|| |
| | | <BULK DUMP REQUEST>
| | |------SYSTEM F0H 43H 2nH 5CH 00H 00H 00H F7H
| | |------USER SEQ F0H 43H 2nH 5CH 01H aaH 00H F7H
| | |------CURRENT VOICE F0H 43H 2nH 5CH 10H 00H 00H F7H
| | |------CURRENT VOICE_SEQ F0H 43H 2nH 5CH 10H 0EH 00H F7H
| | |------CURRENT SCENE1 F0H 43H 2nH 5CH 10H 10H 00H F7H
| | |------CURRENT SCENE2 F0H 43H 2nH 5CH 10H 11H 00H F7H
| | |[SW5]-CURRENT SCENE_CTRL F0H 43H 2nH 5CH 10H 12H 00H F7H
| | |------USER VOICE F0H 43H 2nH 5CH 11H aaH 00H F7H
||
| |------SYSTEM EXCLUSIV MESSAGE
| MIDI MASTER VOLUME F0H 7FH 7FH 04H 01H llH mmH F7H
| IDENTITY REQUEST F0H 7EH 0nH 06H 01H F7H
|
|-------+--SYSTEM EXCLUSIV MESSAGE
| TEST ENTRY F0H 43H 10H 18H 5AH 00H F7H
| LCD HARD COPY F0H 43H 10H 18H 5AH 01H F7H
|
+----TIMING CLOCK F8H
+----ACTIVE SENSING FEH
SW3 [] MIDI Device Number
SW4 [] ARPEGGIO/STEP SEQ SELECT
Available only when Step Sequencer is selected.
SW5 [] SCENE SELECT
Available only when Scene Select is set to "Scene Control".
SW6 [] MIDI Receive Channel
Depends on Receive Channel set in System Data.
*1 If Control Change Mode is "mode2", then additional Control Change numbers are received. (See (3-1-6).)
(3) TRANSMIT/RECEIVE DATA
(3-1) CHANNEL VOICE MESSAGES
(3-1-1) NOTE OFF
STATUS 1000nnnn(8nH) n = 0 ~ 15; MIDI RECEIVE CHANNEL
NOTE NUMBER 0kkkkkkk k = 0(C-2)~127(G8)
VELOCITY 0vvvvvvv ignores "v"
Reception only.
(3-1-2) NOTE ON/OFF
STATUS 1001nnnn(9nH) n = 0 ~ 15; MIDI TRANSMIT/RECEIVE CHANNEL
NOTE NUMBER 0kkkkkkk k = 0(C-2)~127(G8); when receiving
k = 36(C1)~96(C6); when transmitting
k = 0(C-2)~127(G8); selectable when transposed
VELOCITY 0vvvvvvv (v
0) NOTE ON
00000000 (v
0) NOTE OFF
(3-1-3) PROGRAM CHANGE
STATUS 1100nnnn(CnH) n = 0 ~ 15; MIDI TRANSMIT/RECEIVE CHANNEL
PROGRAM NUMBER 0ppppppp p = 0 ~ 127
(3-1-4) CHANNEL AFTER TOUCH
STATUS 1101nnnn(DnH) n = 0 ~ 15; MIDI TRANSMIT/RECEIVE CHANNEL
VALUE 0vvvvvvv v = 0 ~ 127 AFTER TOUCH VALUE
(3-1-5) PITCH BEND CHANGE
STATUS 1110nnnn(EnH) n = 0 ~ 15; MIDI TRANSMIT/RECEIVE CHANNEL
LSB 0vvvvvvv PITCH BEND CHANGE LSB
MSB 0vvvvvvv PITCH BEND CHANGE MSB
Transmitted with a resolution of 7 bits.
(3-1-6) CONTROL CHANGE
STATUS 1011nnnn(BnH) n = 0 ~ 15; MIDI TRANSMIT/RECEIVE CHANNEL
CONTROL NUMBER 0ccccccc
CONTROL VALUE 0vvvvvvv
* TRANSMITTED CONTROL NUMBERS
c = 1 MODULATION ; v = 0 - 127 *1
c = 4 FOOT CONTROLLER ; v = 0 - 127 *1
c = 7 MAIN VOLUME ; v = 0 - 127 *1
c = 12 RIBBON Z CONTROLLER ; v = 0 - 127 *1
c = 13 RIBBON X CONTROLLER ; v = 0:-64 - 64:0 - 127:+63 *1
c = 64 SUSTAIN SWITCH ; v = 0-63:OFF, 64-127:ON *1
c = 71 HARMONIC CONTENT ; v = 0 - 127
c = 72 RELEASE TIME ; v = 0 - 127
c = 73 ATTACK TIME ; v = 0 - 127
c = 74 BRIGHTNESS ; v = 0 - 127
c = 75 DECAY TIME ; v = 0 - 127
c = 00..95 ASSIGNABLE CONT ; v = 0 - 127
* RECEIVED CONTROL NUMBER
c = 1 MODULATION ; v = 0 - 127
c = 4 FOOT CONTROLLER ; v = 0 - 127 *1
c = 5 PORTAMENTO TIME ; v = 0 - 127
c = 6 DATA ENTRY MSB ; v = 0 - 127 *2
c = 38 DATA ENTRY LSB ; v = 0 - 127 *2
c = 7 MAIN VOLUME ; v = 0 - 127
c = 10 PANPOT ; v = 0 - 127
c = 11 EXPRESSION ; v = 0 - 127
c = 12 RIBBON Z CONTROLLER ; v = 0 - 127 *1
c = 13 RIBBON X CONTROLLER ; v = 0:-64 - 64:0 - 127:+63 *1
c = 64 SUSTAIN SWITCH ; v = 0-63:OFF, 64-127:ON
c = 65 PORTAMENTO SWITCH ; v = 0-63:OFF, 64-127:ON
c = 71 HARMONIC CONTENT ; v = 0 - 127
(VCF FILTER RESONANCE)
c = 72 RELEASE TIME ; v = 0 - 127
(AMP EG RELEASE TIME)
c = 73 ATTACK TIME ; v = 0 - 127
(AMP EG ATTACK TIME)
c = 74 BRIGHTNESS ; v = 0 - 127
(VCF FILTER CUTOFF)
c = 75 DECAY TIME ; v = 0 - 127
c = 91 REVERB DEPTH ; v = 0 - 127
c = 93 CHORUS(VARIATION) DEPTH ; v = 0 - 127
c = 94 DELAY DEPTH ; v = 0 - 127
c = 96 DATA ENTRY INC ; v = 127 *2
c = 97 DATA ENTRY DEC ; v = 127 *2
c = 00..95 ASSIGNABLE CONTROLLER ; v = 0 - 127
*1 Preset CONTROL CHANGE NUMBER at the factory. Can be changed.
*2 .Used only when assigning the parameter with RPN numbers.
In addition, the following CONTROL NUMBERs will be transmitted/received when Control Change Mode 2 is selected. (These are unique to the AN1x
and therefore not in accordance with the MIDI 1.0 standard.)
c = 3 SCENE SELECT ; v = 0 - 127
c = 8 LAYER MODE ; v = 0 - 127
c = 9 POLY/MONO MODE ; v = 0 - 127
c = 14 LFO RESET MODE ; v = 0 - 127
c = 15 LFO1 WAVE ; v = 0 - 127
c = 16 LFO1 SPEED ; v = 0 - 127
c = 17 LFO2 SPEED ; v = 0 - 127
c = 18 VCO1 PiTCH MOD DEPTH ; v = 0 - 127
c = 19 VCF FILTER MOD DEPTH ; v = 0 - 127
c = 20 LFO1 DELAY ; v = 0 - 127
c = 21 VCO1 PITCH COARSE TUNE ; v = 0 - 127
c = 22 VCO SYNC PITCH ; v = 0 - 127
c = 23 VCO SYNC PITCH DEPTH ; v = 0 - 127
c = 24 VCO SYNC PITCH SOURCE ; v = 0 - 127
c = 25 PEG DEPTH ; v = 0 - 127
c = 26 PEG SWITCH ; v = 0 - 127
c = 27 PEG DECAY ; v = 0 - 127
c = 28 PEG SUSTAIN LEVEL ; v = 0 - 127
c = 29 FEG RELEASE ; v = 0 - 127
c = 30 VCF CUTOFF KBD TRACK ; v = 0 - 127
c = 31 AMP EG SUSTAIN LEVEL ; v = 0 - 127
c = 33 VCO ALGORITHM ; v = 0 - 127
c = 34 VCO SYNC PITCH MOD SW ; v = 0 - 127
c = 35 FM DEPTH ; v = 0 - 127
c = 36 FM SOURCE1 ; v = 0 - 127
c = 37 FM SOURCE2 ; v = 0 - 127
c = 39 MIXER NOISE LEVEL ; v = 0 - 127
c = 50 VCO1 WAVE TYPE ; v = 0 - 127
c = 51 VCO2 WAVE TYPE ; v = 0 - 127
c = 52 VCO2 PITCH COARSE TUNE ; v = 0 - 127
c = 53 VCO2 PITCH FINE TUNE ; v = 0 - 127
c = 54 VCO2 EDGE ; v = 0 - 127
c = 55 VCO2 PULSE WIDTH ; v = 0 - 127
c = 56 VCO2 PWM DEPTH ; v = 0 - 127
c = 57 VCO2 PITCH MOD DEPTH ; v = 0 - 127
c = 58 VCF HPF CUTOFF ; v = 0 - 127
c = 59 VCF FILTER TYPE ; v = 0 - 127
c = 60 FILTER EG VELOCITY SENS ; v = 0 - 127
c = 61 AMP EG VELOCITY SENS ; v = 0 - 127
c = 62 VCA VOLUME ; v = 0 - 127
c = 63 VCA FEED BACK LEVEL ; v = 0 - 127
c = 68 MIXER VCO1 LEVEL ; v = 0 - 127
c = 69 MIXER VCO2 LEVEL ; v = 0 - 127
c = 70 RING MODULATOR LEVEL ; v = 0 - 127
c = 76 VCO1 EDGE ; v = 0 - 127
c = 77 VCO1 PITCH FINE TUNE ; v = 0 - 127
c = 78 VCO1 PULSE WIDTH ; v = 0 - 127
c = 79 VCO1 PWM DEPTH ; v = 0 - 127
c = 80 VCA AMP MOD DEPTH ; v = 0 - 127
c = 81 FILTER EG DEPTH ; v = 0 - 127
c = 82 FILTER EG ATTACK ; v = 0 - 127
c = 83 FILTER EG DECAY ; v = 0 - 127
c = 85 PORTAMENTO MODE ; v = 0 - 127
c = 86 VCO1 PWM SOURCE ; v = 0 - 127
c = 87 VCO2 PWM SOURCE ; v = 0 - 127
c = 90 ARPEGGIO/STEP SEQ SW ; v = 0 - 127
MODULATION is used to control vibrato depth.
PORTAMENTO TIME sets the time it takes for the pitch to reach the next note played when PORTAMENT SWITCH (CONTROL #65) is set to on. 0 is
the minimum time and 127 is the maximum.
PANPOT position relatively changes accordiong to the preset value for each voice.
REVERB DEPTH controls reverb send level.
CHORUS DEPTH overwrites the Dry: Wet value of the Variation Effect directly for each voice.
DELAY DEPTH controls delay send level.
HARMONIC CONTENT adjusts the resonance preset for each voice. Setting a value adds to or subtracts from the center value 64 since it is an offset
parameter. Higher values produce more resonance. The effective range may be narrower than the range you can designate depending on the selected
voice.
RELEASE TIME adjusts the envelop release time preset for each voice. Setting a value adds to or subtracts from the center value 64 since it is an offset
parameter.
ATTACK TIME adjusts the envelop attack time preset for each voice. Setting a value adds to or subtracts from the center value 64 since it is an offset
parameter.
BRIGHTNESS adjusts the cutoff frequency preset for each voice. Setting a value adds to or subtracts from the center value 64 since it is an offset
parameter. Lower valnes produce a warmer sound. The effective range may be narrower than the range you can designate depending on the selected
voice.
(3-2) CHANNEL MODE MESSAGES
STATUS 1011nnnn(BnH) n = 0 ~ 15 ;MIDI RECEIVE CHANNEL
CONTROL NUMBER 0ccccccc c = CONTROL NUMBER
CONTROL VALUE 0vvvvvvv v = DATA VALUE
(3-2-1) ALL SOUND OFF
All the sounds currently played including the channel messages such as note-on and hold-on in a certain channel are canceled when receiving this
message.
(3-2-2) RESET ALL CONTROLLERS (CONTROL NUMBER = 79H , DATA VALUE = 0)
PITCH BEND CHANGE 0 (Center)
AFTER TOUCH 0 (Minimum)
MODULATION 0 (Minimum)
EXPRESSION 127 (Maximum)
SUSTAIN SWITCH 0 (Off)
130
… 130 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha AN1X wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha AN1X

Yamaha AN1X Bedienungsanleitung - Deutsch - 121 seiten

Yamaha AN1X Bedienungsanleitung - Englisch - 122 seiten

Yamaha AN1X Bedienungsanleitung - Französisch - 120 seiten

Yamaha AN1X Bedienungsanleitung - Portugiesisch - 180 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info