Bedienungsanleitung Yamaha AN1X (Seite 22 von 122) (Englisch)

48724

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

Scene Load Function

The Scene Load function lets you load Scene data from a

Scene in any voice to the corresponding Scene in the

currently selected voice. This lets you, for example, load

the Scene 1 parameters of one voice to Scene 1 of the

currently selected voice, and load the Scene 2 parameters

of another voice to Scene 2 of the currently selected voice.

1. Hold [SCENE 1] (or [SCENE 2]) and enter the

number of the voice whose Scene data you

want to copy. The selected voice number

flashes in the LCD.

2. Press [YES/ENTER] to execute the Scene Load

operation, or [NO] to cancel it.

Data which is loaded:

•All knob parameter settings (excluding [ASSIGN] group)

•VOICE SCENE SETUP Mode and Control Matrix parameters

•VOICE COMMON Vari EF Dry:Wet parameter

Scene Swap Function

The Scene Swap function lets you exchange the data in

one Scene edit buffer with the other.

1. Hold [STORE] and press both [SCENE 1] and

[SCENE 2] switches. “SURE?[Y/N]” flashes in

the LCD.

2. Press [YES/ENTER] to execute the Scene Swap

operation, or [NO] to cancel it.

Data which is exchanged:

•All knob parameter settings (excluding [ASSIGN] group)

•VOICE SCENE SETUP Mode and Control Matrix parameters

•VOICE COMMON Vari EF Dry:Wet parameter

•VOICE FREE EG Track SceneSw parameter

•VOICE ARPEGGIO/SEQ Common SceneSw parameter

CTRL

SCENE

STORE

Selecting Layer Modes

The LAYER switch is used for selecting a Layer

mode from the six available. Every time you

press the switch, a different Layer mode is

selected. The selected Layer at the time of a

Voice Store operation is saved as voice data.

Each Layer mode determines how Note On messages from

either the AN1x’s keyboard or external MIDI devices (as

received at the AN1x’s MIDI [IN] terminal) are handled.

Depending on which Layer mode is selected, either one or

both Scenes will be played, and the Scene Control

function will behave in specific ways. The selected Layer

also affects available polyphony, and determines

multitimbral status.

Layer Modes

SINGLE

This is the normal play mode for a voice. The sound is

determined by the data of the currently selected Scene.

In this mode the AN1x plays with maximum 10 notes

polyphony.

UNISON

This mode is great for getting those “fat” analog-type

sounds of the legendary vintage synths. In Unison

mode, the data of the currently selected Scene is

multiplied. Polyphony is determined by the Poly mode

setting (see page 72). For example, if Poly mode is set

to “mono” or “legato”, then one Note On message will

use five notes of polyphony; if it is set to “poly”, then

one Note On message will use two notes of polyphony.

The Unison Detune function (see page 76) lets you decide the detuning for the

Unison in order to fatten the sound.

DEMO

PORTAMENTO

STORE

ARPEGGIO/SEQ

LAYER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AN1X Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha AN1X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info