Bedienungsanleitung Yamaha AN1X (Seite 93 von 122) (Englisch)

48724

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

soft2: This curve also increases the volume level with a softer

playing style, but is closer to the Normal curve compared to

Soft1.

easy: This curve also increases the volume level with a softer

playing style, but the volume level is stable in all registers

since the velocity curve in the middle register of the keyboard

is close to Normal.

wide: This curve decreases the volume level with a softer

playing style and increases the volume with a stronger playing

style, resulting in a wider dynamic range overall.

hard: This curve increases the volume level with a stronger

playing style, and is suitable for people with a heavy key

touch.

Vel Fix (Velocity Fix) 1 ~ 127: This sets the velocity of

the AN1x’s keyboard to a specific value, which lets you play

the sound at a fixed velocity regardless of playing strength.

Keyboard Playing Strength

Volume

Keyboard Playing Strength

Volume

Keyboard Playing Strength

Volume

Keyboard Playing Strength

Volume

Keyboard Playing Strength

Volume

MIDI

MIDI parameters are related to transmission and

reception of MIDI messages to and from an external

MIDI device. There are five parameters available,

including Tx Ch (Transmit Channel), Rx Ch (Receive

Channel), Device Number, Local, and Bulk Dump.

● Tx Ch (Transmit Channel)

The Transmit Channel parameter sets the MIDI channel

on which the AN1x’s keyboard, controllers and

switches transmit MIDI messages. When not

transmitting to an external device, set Tx Ch to “off”.

Although MIDI Tx Ch and MIDI PtnTxCh can be set to the same channel, the notes

played on the keyboard may interfere with the notes of the Arpeggiator or Step

Sequencer pattern. Therefore, it is best to set each to a different channel number.

Settings: 1 ~ 16, off

The AN1x can play and control (and be controlled by) other MIDI devices such as

tone generators, sequencers, and more. For information about MIDI, see page

109.

● Rx Ch (Receive Channel)

The Receive Channel parameter sets the MIDI channel

on which the AN1x’s tone generator receives MIDI

note, controller and other messages. When Layer mode

is set to SINGLE or UNISON, the current Scene setting

determines which Scene is played by external MIDI

signals.

Each Scene can be assigned its own MIDI channel and

be played independently by incoming MIDI signals

(when Layer mode is set to SPLIT/SPLIT UNISON or

DUAL/DUAL UNISON). When not receiving from an

external device, set Rx Ch to “off”.

Settings:

SINGLE/UNISON: 1 ~ 16, off

SPLIT/SPLIT UNISON/DUAL/DUAL UNISON:

Scene 1: 1 ~ 16, off; Scene 2: 1 ~ 16, off

When Layer mode is set to SINGLE or UNISON, the receive channel for Scene 1

and Scene 2 are the same, and you cannot select a different receive channel for

each.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AN1X Seite 93

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha AN1X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info