Bedienungsanleitung Yamaha AP-U70 (Seite 20 von 156) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

557293

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

E-18

ADVANCED OPERATION

Setting adjustment on the Setup panel

When you click SETUP of the Main Panel, the Setup panel appears, allowing you to perform the following settings.

USB Setting

Ⅵ USB Multi-Channel Setting (for Windows only)

This allows you to select the number of channels for

sending playback signals via the USB connection from

two, four, and six channels. (Note that you cannot

record signals from the USB connection on the

computer when six channels are selected.)

Custom Keys

Ⅵ Skin Selection

This allows you to select the skin (the design of the

background picture of the Application Software) from

several preset patterns.

Ⅵ Setting Remote Control Custom keys

This allows you to store a set of commands (input

selector, sound field program, volume setting, etc.) to

each of the A, B and C keys on the remote control. After

storing, simply pressing each key will execute the

stored command.

Note

The screen design, functions, etc. are subject to change

due to software upgrades. For details, refer to the

Online Help of the Application Software.

Edit Names of Input Sources

You can assign a name consisting up to seven characters

to each input source. For example, if a tape deck is

connected to the AUX 1 terminals, you can change the

name, AUX 1, to TAPE. As this name change information

is sent to the main unit, the display on the main unit

changes accordingly.

Volume Settings

Ⅵ USB Mix

When USB Mix is on, even if signals received at input

terminal(s) other than the USB terminal when it is

selected, you can mix the input signals from that

selection with the signals from the computer via the

USB connection and play the mixed signals. For

example, while you are listening to music from the tape

deck connected to AUX 1, mail arrival beeps and

warning beeps are also available.

Clicking the check box to enter the check mark in the

box will turn on the USB Mix. This status allows you to

adjust the volume level of the signals from the USB

connection. (As this adjusts the volume balance

between the selected input signals and the input signals

from the USB connection, it does not affect the volume

when USB is selected by the input selector keys.)

Clicking the check box to delete the check mark will turn

off the USB Mix. In this status, the signals from the USB

connection can be played only when USB is selected by

the input selector keys.

Ⅵ Maximum Volume Setting

When adjusting the volume on the Application Software,

you may inadvertently turn up the volume too high. To

avoid this, you can use this function to set a maximum

volume for the Application Software.

Ⅵ Digital Volume Setting

This allows you to digitally turn up and down the volume

in the DSP. Take care not to turn up the volume when

the level of the digital input signal is high as it may

cause sound distortion due to digital processing. If

sound distortion occurs, turn down the volume.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AP-U70 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info