Bedienungsanleitung Yamaha AP-U70 (Seite 21 von 156) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

557293

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

E-19

APPENDIX

English

APPENDIX

Problem

The unit cannot be turned on

though the power switch is

pressed.

No sound.

No surround effect.

When making a recording from an

audio CD to an MD, CD-R, etc., all

tracks are recorded as one track.

Program sources on an MD, CD-R,

etc. which is a copy of an audio

CD, cannot be recorded on the

computer via the USB connection.

Signals inputted to your computer

via the USB connection cannot be

recorded on the computer.

No effect of Dolby Digital or DTS

though the sound field program

“VDD” is selected.

Different sounds are heard

together.

Left and right volume levels are

different.

Cause

The power cord is not plugged in or is not

completely inserted.

This unit is in the standby mode.

Incorrect output cord connections.

The muting function of this unit is on.

Headphones are connected to the headphone

jack of this unit.

The volume is set to minimum.

The playback source is not selected by the

input selector keys.

The power of the equipment selected as the input

source is off.

The DSP is off.

A DSP sound field program is selected or the

built-in graphic equalizer is used.

You cannot make a recording from a CD-R,

MD, etc. which is a copy of an audio CD, to

another CD-R, MD, etc. via the USB

connection or the digital terminal connection.

Incorrect setting of the recording device on the

computer.

The playback source is encoded with neither

Dolby Digital nor DTS.

Sound from the computer via the USB

connection may be mixed with sound from

other sources because the “USB Mix” setting is

set to “ON” with the Application Software.

The level balance is not set to center on the

“Balance” setting on the VIRTUAL panel in the

Application Software.

Remedy

Firmly plug in the power cord.

Turn on this unit by pressing the power switch on the

front panel or the POWER key on the remote control.

Connect the cords properly. If the problem

persists, the cords may be defective.

Turn off the muting by pressing the MUTE key.

Disconnect the headphones from the

headphone jack to output sound from the

speakers.

Increase the volume.

Select the playback source using the input

selector keys.

When PC is selected as the input source, check

that the digital or analog input is correctly

selected.

Turn on the equipment.

Turn on the DSP.

Turn off the DSP and the graphic equalizer.

Record the signals of such an MD, CD-R, etc. on

the computer by sending the signals via an

analog connection.

Correctly set the recording device on the

computer. [Refer to “Recording on computer (via

the USB connection”) on page 12.]

Use a source encoded with Dolby Digital or DTS.

Set the “USB Mix” setting to “OFF” if you do not

want to hear mixed sounds.

Set the level balance to center.

Troubleshooting

Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or if the

instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service

center.

APPENDIX

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AP-U70 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info