E-28
ENJOYING LISTENING TO A SOURCE
BASIC LISTENING OPERATIONS
When you have completed all connections and
adjustments before listening operations, begin listening
to a source on this system.
1 Press the POWER switch to turn the power on.
* When the power is on, the display on the main
control unit shows the name of currently selected
input source or other information.
2 Press the VOLUME “ ” (or “–”) button to decrease
the volume to minimum until “MIN” is shown on the
display.
3 Select a source which you want to listen to or watch
by pressing the corresponding input selector button.
* The name of selected input source is shown on
the display.
4 Play the source.
●
To play a CD on the built-in CD player, see
pages 30 to 32.
●
To listen to a radio program on the built-in
tuner, see pages 33 to 37.
●
To play a source on an external audio/video
unit connected to this system, see page 44.
5 Press the VOLUME “ ” (or “+”) button to increase
the volume.
* Volume level is shown on the display.
6 If you prefer, use the built-in digital sound field
processor including the Dolby Pro Logic Surround
decoder.
a) Press the DSP ON/OFF button so that a name of
DSP program appears on the display.
b) Select a desired program by pressing the
PROGRAM selector “ ” or “ ” button.
(See page 45 for descriptions about programs.)
c) According as you prefer, adjust the delay time,
the center speaker output level and/or the rear
speaker output level. (See pages 47 to 48 for
details.)
d) To switch off the digital sound field processor;
Press the DSP ON/OFF button.
* Sound output becomes 2-channel stereo.
