Bedienungsanleitung Yamaha AVXS100 (Seite 24 von 82) (Englisch)

19270

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

ADJUSTING SPEAKER OUTPUT LEVELS

This section explains how to adjust speaker output levels

using the test tone generator. When this adjustment is

complete, the output level heard at the listening position

should be the same from each speaker. This is important

for best performance of the digital sound field processor,

and the various decoders (Dolby Digital, Dolby Pro

Logic, Dolby Pro Logic II and DTS).

Note

• Since this unit cannot enter the test mode while headphones are

connected to this unit, be sure to unplug the headphones from

the SILENT jack when using the test tone.

Using the test tone

Use the test tone to balance the output levels of the

speakers.

Note

• The adjustment of each speaker output level should be made at

your listening position using the remote control.

1 Press AMP.

2 Press TEST to output the test tone.

3 Press VOL +/– to adjust the volume of this

unit so you can hear the test tone.

The test tone is heard (in order) from the LEFT

(front left speaker), CENTER (center speaker),

RIGHT (front right speaker), R SUR. (rear right

speaker), L SUR. (rear left speaker), and the

SUBWOOFER (subwoofer). The tone is produced

for about 2 seconds from each speaker.

VIDEO 1

SHIFT

CODE SET

HALL

JAZZ

SETUP

ROCK

ANGLE

ENTERTAINMENT

MARKER

SPORTS

MONO MOVIE

PLAY MODE

MOVIE 1

REPEAT

MOVIE 2

A–B

DVD

AMP

/DTS

TOP MENU

LEVEL

SET MENU

TEST

ON SCREEN

B. BOOST

RETURN

SELECT

–

MATRIX 6.1

GROUP

CANCEL

STEREO

PAGE

MUTE

VOL

ABCDE

ENTER

PRESET

CHCH

AMP

VOL + / –

TEST

j, i

(U.S.A. model)

4 Adjust the level of the effect speakers using

j/ i so that it matches the level of the front

speakers.

While adjusting, the test tone is heard from the

selected speaker.

Note

• To adjust the level of the front speakers, use VOL +/– on

the remote control.

5 When adjustment is complete, press TEST to

stop the test tone.

• It is not necessary to readjust the speaker levels once they are

set (as long as you do not change the speakers). You can enjoy

listening to or watching the input source at the desired volume

simply by pressing VOL +/– on the remote control.

• If the output level of the effect speakers (center, rear left, and

rear right) cannot be increased enough to match the level of the

front speakers, set “1E F. Level” on SET MENU to –10 dB (see

page 61). This setting decreases the front speaker output level

to about one-third of the normal level. After you have set “1E F.

Level” on the SET MENU to –10 dB, adjust the levels for the

center and rear speakers again.

Notes

• If “1A CENTER” on the SET MENU is set to NON and the

center speaker is not connected, the center channel sound is

automatically output from the front left and right speakers.

• If “1C REAR LR” on the SET MENU is set to NON, the

output level of the rear left and right speakers cannot be

adjusted in step 4. The test tone will be circulated skipping the

rear right and left speakers.

• If “1D BASS” on the SET MENU is set to FRONT, the test

tone will be circulated skipping the subwoofer.

L SUR. R SUR.

CENTER

RIGHT

LEFT

SUBWOOFER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AVXS100 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info