Bedienungsanleitung Yamaha AVXS80 (Seite 20 von 341) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

19272

Zoom out

Zoom in

Vorherige Seite

1/341

Nächste Seite

ADJUSTING SPEAKER OUTPUT LEVELS

This section explains how to adjust speaker output levels

using the test tone generator. When this adjustment is

complete, the output level heard at the listening position

should be the same from each speaker. This is important

for best performance of the digital sound field processor,

and the various decoders (Dolby Digital, Dolby Pro

Logic, Dolby Pro Logic II and DTS).

Note

• Since this system cannot enter the test mode while headphones

are connected to this system, be sure to unplug the headphones

from the PHONES (

SILENT) jack when using the test tone.

Using the test tone

Use the test tone to balance the output levels of the

speakers.

Note

• The adjustment of each speaker output level should be made at

your listening position using the remote control.

1 Press AMP.

2 Press TEST to output the test tone.

3 Press VOL +/– to adjust the volume of this

system so you can hear the test tone.

The test tone is heard (in order) from the LEFT

(front left speaker), CENTER (center speaker),

RIGHT (front right speaker), R SUR. (rear right

speaker), L SUR. (rear left speaker), and the

SUBWOOFER (subwoofer). The tone is produced

for about 2 seconds from each speaker.

ENTERTAINMENT

ROCKJAZZHALL

4321

MOVIE 2MOVIE 1

MONO MOVIE

SPORTS

8765

STEREO

MATRIX 6.1

SELECT

/DTS

CANCEL

1009

CODE SET

TOP MENU

LEVEL

SET MENU

TEST

B.BOOST

ON SCREEN

RETURN

ABCDE

MUTE

VOL

PRESET

ENTER

CH CH

DVD

AMP

VOL + / —

TEST

j, i

(U.S.A. model)

4 Adjust the level of the effect speakers using

j/i so that it matches the level of the front

speakers.

While adjusting, the test tone is heard from the

selected speaker. After j or i is released, the test

tone begins travelling to another speaker again.

Note

• To adjust the level of the front speakers, use VOL +/– on

the remote control.

5 When adjustment is complete, press TEST to

stop the test tone.

• It is not necessary to readjust the speaker levels once they are

set (as long as you do not change the speakers). You can enjoy

listening to or watching the input source at the desired volume

simply by pressing VOL +/– on the remote control.

• If the output level of the effect speakers (center, rear left, and

rear right) cannot be increased enough to match the level of the

front speakers, set “1E F. Level” on SET MENU to –10 dB (see

page 37). This setting decreases the front speaker output level

to about one-third of the normal level. After you have set “1E F.

Level” on the SET MENU to –10 dB, adjust the levels for the

center and rear speakers again.

Notes

• If “1A CENTER” on the SET MENU is set to NON, the level

of the center speaker cannot be adjusted. The test tone skips the

center speaker.

• If “1C REAR LR” on the SET MENU is set to NON, the

output level of the rear left and right speakers cannot be

adjusted in step 4. The test tone will be circulated skipping the

rear right and left speakers.

• If “1D BASS” on the SET MENU is set to FRONT, the test

tone will be circulated skipping the subwoofer.

L SUR. R SUR.

CENTER

RIGHT

LEFT

SUBWOOFER

E3-S80-8-18(6.29)a 02.6.29, 4:32 AM18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AVXS80 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha AVXS80

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info