Bedienungsanleitung Yamaha AVXS80 (Seite 33 von 341) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

19272

Zoom out

Zoom in

Vorherige Seite

1/341

Nächste Seite

English

RECEIVING RDS STATIONS (U.K. and Europe models only)

TUNING

Changing the RDS mode

The four modes are available in this system for displaying

RDS data. When an RDS station is being received, PS,

PTY, RT and/or CT mode indicators that correspond to

the RDS data services offered by the station light up on

the front panel display. Press FREQ/RDS repeatedly to

change the display mode among the RDS data offered by

the transmitting station in the order shown below.

Notes

• When an RDS station is being received, do not press

FREQ/RDS until one or more RDS mode indicators light up on

the front panel display. If you press the button before the

indicators light up on the front panel display, the mode cannot

be changed. This is because this system has not yet received all

of the RDS data on the station.

• RDS data not offered by the station cannot be selected.

• The RDS data service cannot be utilized by this system if the

received signal is not strong enough. In particular, the RT mode

requires a large amount of data to be received, so it is possible

that the RT mode may not be displayed even if other RDS

modes (PS, PTY, etc.) are displayed.

• RDS data cannot sometimes be received under poor reception

conditions. If so, press AUTO/MAN’L so that the “AUTO”

indicator goes off from the front panel display. Although the

reception mode is changed to monaural by this operation, when

you change the display to RDS mode, RDS data may be

displayed.

• If the signal strength is weakened by external interference

during the reception of an RDS station, the RDS data service

may be cut off suddenly and “...WAIT” will appear on the front

panel display.

PTY SEEK function

If you select the desired program type, this system

automatically searches all preset RDS stations that are

broadcasting a program of the required type.

1 Press PTY SEEK MODE to set this system in

the PTY SEEK mode.

The program type of the station being received or

“NEWS” flashes on the front panel display.

2 Press PRESET u/d (d PRESET/TUNING u

on the front panel) to select the desired

program type.

The selected program type appears on the front panel

display.

3 Press PTY SEEK START to begin searching

all preset RDS stations.

The selected program type flashes and the “PTY

HOLD” indicator lights up on the front panel display

while searching for stations.

• If a station that is broadcasting a program of the

required type is found, this system stops at that

station.

• If the called station is not the desired one, press

PTY SEEK START again. This system begins

searching for another station that is broadcasting a

program of the same type.

■ To cancel the steps 1 or 2

Press PTY SEEK MODE twice.

PS mode

PTY mode

RT mode

CT mode

RDS mode

OFF

E6-S80-30-31(5.30)a 02.6.29, 4:34 AM31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AVXS80 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha AVXS80

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info