7 If needed, adjust the BASS, TREBLE, BALANCE
LOUDNESS, etc. controls. (Refer to page 18.)
1 Turn the control to “∞”.
4 Select the speakers to be used.
* Be sure that the IMPEDANCE SELECTOR switch is
correctly set as explained on page 11.
* If you use two speaker systems, press both the A and B
switches to ON.
* If you listen with headphones, press both the A and B
switches to OFF.
5 Play the source.
6 Adjust the volume to the desired level.
2 Turn the power on.
3 Select the desired input source.
* If you select PHONO as an input source, you should make
sure that PHONO (MM/MC) is switched to the correct
position. (Refer to page 10.)
Note
To turn off the power, press the POWER switch again.
AX-592 and AX-892 only
* The AX-492 does not have a SUBSONIC FILTER and MUTING switch.
* The AX-592 does not have a MUTING switch.
