Bedienungsanleitung Yamaha AX-596 (Seite 4 von 100) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

65158

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

E-2

1. To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2. Install this unit in a cool, dry, clean place – away from

windows, heat sources, sources of excessive vibration,

dust, moisture and cold. Avoid sources of humming

(transformers, motors). To prevent fire or electrical

shock, do not expose the unit to rain or water.

3. Never open the cabinet. If something drops into the

set, contact your dealer.

4. Do not use force on switches, controls or connection

wires. When moving the unit, first disconnect the

power plug and the wires connected to other

equipments. Never pull the wires themselves.

5. The openings on the unit cover assure proper

ventilation of the unit. If these openings are

obstructed, the temperature inside the unit will rise

rapidly; therefore, avoid placing objects against these

openings. Install the unit in a well-ventilated area to

prevent fire or damage.

<Europe, U.K. and China models only>

Be sure to allow a space of at least 20 cm behind, 20

cm on both sides and 30 cm above the top panel of the

unit to prevent fire or damage.

6. The voltage used must be the same as that specified

on this unit. Using this unit with a higher voltage than

specified is dangerous and may result in fire or other

accidents. YAMAHA will not be held responsible for

any damage resulting from use of this unit with a

voltage other than specified.

7. Always set the VOLUME control to “

∞

” before starting

the audio source play. Increase the volume gradually

to an appropriate level after the play has been started.

8. Do not attempt to clean the unit with chemical solvents

as this might damage the finish. Use a clean, dry

cloth.

9. Be sure to read the “TROUBLESHOOTING” section

regarding common operating errors before concluding

that the unit is faulty.

10. When not planning to use this unit for a long period

(ie., vacation, etc.), disconnect the AC power plug from

the wall outlet.

11.

To prevent lightning damage, disconnect the AC power

plug when there is an electric storm.

12. Grounding or polarization – Precautions should be

taken so that the grounding or polarization of an

appliance is not defeated.

13. Do not connect any audio equipment to the AC outlet

on the rear panel if the equipment requires more power

than the outlet is rated to provide.

14. VOLTAGE SELECTOR

(China and General models only)

The voltage selector on the rear panel of this unit

must be set for your local main voltage BEFORE

plugging into the AC main supply.

Voltages are 110/120/220/240 V AC, 50/60 Hz.

For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

Note: The plug severed from the mains lead must be

destroyed, as a plug with bared flexible cord is hazardous if

engaged in a live socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT:

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug, proceed

as follows: The wire which is coloured BLUE must be

connected to the terminal which is marked with the letter

N or coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED. Making sure

that neither core is connected to the earth terminal of the

three pin plug.

When this unit is turned off by pressing the STANDBY/ON

switch on the front panel or the remote control, the

STANDBY indicator on the front panel lights up. This state

is called the standby mode. In this mode, this unit is

designed to consume a small amount of power. This

unit’s power supply is completely cut off from the AC line

only when the POWER switch on the front panel is set in

the OFF position or the AC power cord is disconnected.

WARNING

Do not change the IMPEDANCE SELECTOR switch

setting while the power to this unit is on, otherwise

this unit may be damaged.

If this unit fails to turn on when the POWER switch is

pressed:

The IMPEDANCE SELECTOR switch may not be set to

either end. If so, set the switch to either end when this

unit’s power supply is completely cut off.

CAUTION: Read this before operating your unit.

(Europe model)

IMPEDANCE SELECTOR

CAUTION

SEE INSTRUCTION MANUAL FOR CORRECT SETTING.

IMPEDANCE SELECTOR

AC OUTLETS

SET BEFORE POWER ON

A OR B : 6

Ω

MIN. /SPEAKER

A B : I2

Ω

MIN. /SPEAKER

A OR B : 4

Ω

MIN. /SPEAKER

A B : 8

Ω

MIN. /SPEAKER

SWITCHED

l00W MAX. TOTAL

MAINS

R L

SPEAKERS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AX-596 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha AX-596

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info