Bedienungsanleitung Yamaha bd s1065 (Seite 45 von 63) (Englisch)

139688

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Troubleshooting

41 En

ADDITIONAL INFORMATION

English

■ Other

■ Messages Relating to BD disc and DVD disc

– The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or the

operation is not correct.

To Reset this Player

If this Player receives strong interference from a source such as excessive static electricity, strong external noise,

malfunction of power supply, or voltage caused by lightning during use or a wrong operation is sent to the Player, errors

like the Player not accepting an operation may occur.

1 Press and hold p on the Player until “RESET” appears on the front panel display when the Player does not operate

properly even after the power has been turned off.

2 Turn on the power.

Notes

– When a reset is performed while the power is on, the Player will turn off. Turn the power on again. At this point, it

may take a few moments for the system processing to finish before the Player is ready for use.

– When the problem persists even after performing a reset, unplug the power cable and plug it in again. If this does

not solve the problem, contact the nearest service center approved by Yamaha.

Keylock function

You can set the keylock to prevent accidental operations. Press and hold and on the front panel for more

than 4 seconds while no disc is inserted in this Player and the disc tray is closed.

– Each time you perform this operation, the function is activated or deactivated.

– If you try to operate the Player while the keylock function is set, “Lock” blinks on the front panel display to indicate

that the keylock function is set.

Problem Possible causes and solutions

The TV operates incorrectly. – Some TVs with wireless remote control capability may operate incorrectly when using

the remote control of this Player. Use such TVs away from this Player.

The Player heats up during use. – When using this Player, the console cabinet may heat up depending on the usage

environment. This is not a malfunction.

Error message Possible Error Possible Error

Cannot play. – The disc cannot be played back with this Player. – Check the disc, and load it correctly.

Incompatible disc. – If you load a disc which cannot be played with

this Player (i.e. a scratched disc), or if you load

a disc upside down, this message will appear,

and the disc tray will automatically pop out.

– Occurs if the loaded disc cannot be played

because it is a non-standard disc or scratched,

etc.

– Remove the disc.

Cannot operate. – Occurs if an operation is incorrect.

This USB memory is not formatted

properly. Please format the memory in

USB memory management.

– Occurs if there is a formatting error. – Format the USB memory again.

– Occurs if the USB memory is not formatted

with FAT 32/16.

– Format the USB memory with your

PC.

The Connected USB Memory cannot

be used. It should be compliant with

USB 2.0.

– Occurs if USB memory not compliant with

USB 2.0 High Speed (480Mbit/s) is used (i.e.

USB 1.0/USB 1.1).

– Connect USB 2.0 High Speed

(480Mbit/s) compliant USB

memory.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha bd s1065 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha bd s1065

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info