Bedienungsanleitung Yamaha CBX-K1 (Seite 29 von 31) (Englisch)

586874

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

2. Overview

Transmitted data includes messages from the CBX-K1 itself

and messages from an external device connected to MIDI

IN. Besides conventional MIDI messages, single byte

messages can also be transmitted.

3. Transmitted Data

3.1 Channel Voice Messages

(1) Note on/off <<9n kk vv>>

n=Channel 0-15

kk=Note number 0-127

vv=Velocity 0 : note off, 1-127 : note on

(2) Polyphonic key pressure <<An kk vv>>

n=Channel 0-15

kk=Note number 0-127

vv=Pressure value 0-127

* When pressing several keys simultaneously, after touch of only the

highest note number is output.

* Though the keyboard of the CBX-K1 itself has no after touch, after

touch data can be transmitted from the ASSIGNABLE Wheel when

Channel pressure or Polyphonic key pressure is assigned to the

Wheel.

(3) Program change <<Cn pp>>

n=Channel 0-15

pp=Program number 0-127

(4) Control change <<Bn cc vv>>

n=Channel 0-15

cc=Control number 0-119

vv=Control value

* When RPN or NRPN is assigned to the ASSIGNABLE Wheel, the

MSB, LSB and data entry values are transmitted in a group each

time.

(5) Channel pressure <<Dn cc vv>>

n=Channel 0-15

vv=Pressure value 0-127

* Though the keyboard of the CBX-K1 itself has no after touch, after

touch data can be transmitted from the ASSIGNABLE Wheel when

Channel pressure or Polyphonic key pressure is assigned to the

Wheel.

(6) Pitch bend change <<En ll mm>>

n=Channel 0-15

ll=Pitch bend value LSB 0-127

mm=Pitch bend value MSB 0-127

3.2 Channel Mode Messages

(1) All sound off <<Bn 78 00>>

n=Channel 0-15

(2) Reset all controller <<Bn 79 00>>

n=Channel 0-15

(3) All note off <<Bn 7B 00>>

n=Channel 0-15

3.3 System Exclusive Messages

(1) GM system on <<F0 7E 7F 09 01 F7>>

(2) XG system on

<<F0 43 1n 4C 00 00 7E 00 F7>>

n=Device number

(3) Master volume <<F0 7F 7F 04 01 00 vv F7>>

vv=Volume value 0-127

(4) Master balance <<F0 7F 7F 04 02 00 vv F7>>

vv=Balance value 0-127

(5) Master tuning

<<F0 43 1n 27 30 00 00 pm pl 00 F7>>

n=Device number

pm=Tuning value MSB 0-15 (higher 4 bits of 1-byte data)

pl=Tuning value LSB 0-15 (lower 4 bits of 1-byte data)

(6) GM-B reset

<<F0 41 10 42 12 40 00 7F 00 41 F7>>

3.4 System Common Messages

(1) Song select <<F3 vv>>

vv=Song number 0-127

(2) Song position pointer <<F2 ll mm>>

ll=

Song position pointer LSB

0-127

mm=

Song position pointer MSB

0-127

3.5 System Real Time Messages

(1) Timing clock <<F8>>

(2) Start <<FA>>

(3) Continue <<FB>>

(4) Stop <<FC>>

(5) Active sensing <<FE>> Transmission should not

be paused for longer

than 250 ms.

3.6 Single-byte Data Transmission

(1) Single-byte data <<xx>>xx=0-255

Separate from conventional MIDI message transmission, single byte

messages can also be transmitted.

3.7 Others

* Running Status bytes are not used. However, incoming Running

Status messages are added and transmitted.

* If the incoming Note Off messages include <<8n>> status, the

<<8n>> status is merged and output as is. (The CBX-K1 transmits

Note Off messages as <<9n>> status with a velocity of 0.)

MIDI Data Format

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CBX-K1 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CBX-K1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info