Bedienungsanleitung Yamaha CBXK2 (Seite 18 von 44) (Englisch)

586883

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Playing and Using Your CBX-K2

These two wheels and slider let you control different

aspects of the sound in realtime as you play. These con-

trols affect the connected MIDI instrument.

Move the Pitch Bend Wheel as you play to change the pitch

of the sound. Moving the wheel away from you bends the

Using the Pitch Bend Wheel, Assignable Wheel, and Assignable Slider

pitch up. The Pitch Bend Wheel is spring-loaded for

returning to center (normal pitch).

Move the Assignable Wheel as you play to change the

modulation of the sound (MIDI Controller #1). Moving the

wheel away from you increases the modulation. Moving

the Assignable Slider changes the Data Entry value (MIDI

Controller #6). (Notice that the “006” flashes in the

display, indicating data for Controller #6 is being transmit-

ted.) The Assignable Wheel and Assignable Slider can also

be set to control other functions; see the section below for

details.

Depending on the connected device and the selected voice,

there may be no response or change in the sound. Refer to

the owner’s manual of the particular device for details.

As mentioned above, the Assignable Wheel and Slider can

be used to control a variety of different functions. The

default setting for the Wheel is modulation (MIDI Control-

ler #1), and the default for the Slider is data entry (MIDI

Controller #6). However, either can be set to control

volume, pan position, attack or release time, coarse tuning

or fine tuning, and reverb or chorus depth, among other

Controllers. (For a complete list of the available Control-

lers and their numbers, see on page 30.)

Assignable Wheel / Operation

Simultaneously hold down C and press

S in the ﬁ section.

The LED display indicates the current Assignable

Wheel’s Controller number.

While continuing to hold down C, enter the

number 10 (press 1, then 0), then press

This sets the Assignable Wheel to Controller number 10

(Pan). Play the keyboard and move the Assignable Wheel

as you play, and hear how the sound moves left and right in

the stereo image as you move the Wheel. As you move the

Wheel, the currently assigned Controller number appears in

the LED display. The Assignable Wheel is particularly

Re-assigning the Assignable Wheel and Slider

suited to control numbers such as #10 (Pan) and #73

(Attack Time) because of its center detent.

Try entering other Controller numbers, repeating steps 1

and 2 above. (A short list of Controllers is printed on the

panel. Try entering some of these; many—but not all—of

these will have an obvious effect on the sound as you move

the wheel.)

Assignable Slider / Operation

Simultaneously hold down C and press

S in the ‡ section.

The LED display indicates the current Assignable

Slider’s Controller number.

While continuing to hold down C, enter the

desired Controller number (for example, “7” for

MIDI volume control), then press K.

Play the keyboard and move the Assignable Slider as

you play, and hear how the volume of the sound

changes (if you are using Controller #7).

* You can also assign RPN and NRPN numbers to the

Assignable Wheel or Slider. (Pages 26 and 30.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CBXK2 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CBXK2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info