Bedienungsanleitung Yamaha CBXK2 (Seite 28 von 44) (Englisch)

586883

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Group B Functions — List

● Footnotes

*1 Depending on the selected message or the particular device that is

connected to the CBX-K2, there may be no response. Refer to the

owner’s manual of the device for details.

*2 The Time Signature Top value is selected in the following order: 4, 5,

6, ... 15, 16, 1, 2, 3, 4, etc. (“4” is used as the starting point, since

that is the most commonly used Top value.) The order for the Time

Signature Bottom values is 4, 8, 16, 4, etc.

*3 The range for the Measure function depends on the currently set Time

Signature. When set to 4/4, the range is 1 – 999; when set to 8/4 or

16/8, the range is 1 – 512. The absolute maximum is 999.

*4 • The channel number can only be entered as a hexadecimal value (1

– F, 0).

• Using system exclusive messages to turn Merge on or off can only

be done for all channels (as in the corresponding Group A

function).

*5 When Fixed Velocity (in Group A) is set to a value other than 0, the

Touch Sensitivity function is inactive. The following table shows the

velocity range for the minimum, medium, and maximum Touch

Sensitivity settings.

Key Panel Name Function name Operation (press and hold [SHIFT] ) Operation Examples

C1 SEQUENCER SONG SELECT Song Select C + ç → œ →

(song number) → L

C#1 TIME SIGNATURE TOP Time Signature Top C + ç → {¡}...(press repeatedly)

(numerator)

D1 TIME SIGNATURE BOTTOM Time Signature Bottom C + ç → {®}...(press repeatedly)

(denominator)

D#1 MEASURE Measure Number C + ç → † →

(measure number) → L

E1 - VOICE MAP Voice Map C + ç → ¥ →

(Map number) → L

F1 - POLY/MONO Poly/Mono C + ç → ø

F#1 RESET RESET CONTROL Reset All Controllers C + ç → å

G1 SOUND OFF ALL CH All Sound Off (all channels) C + ç → ß

G#1 TG300B TG300B Reset C + ç → ™ → L

A1 SYSTEM CHANNEL MERGE Merge On /Off C + ç → ƒ →

(each channel) (channel number)

A#1 DEVICE NUMBER Device Number C + ç → © →

(device number) → L

B1 TOUCH SENSITIVITY Touch Sensitivity C + ç → ˙ →

(value) → L

C2 - RPN Controller Direct Data Send C + ç → A → (MSB) → (LSB) → L →

(RPN) {(control value) → L}

C#2 - CONTROLLER Controller Direct data Send C + ç → S → (controller number) →

(controller number) L → {(controller value) → L }

D2 - NRPN Controller Direct Data Send C + ç → D → (MSB) → (LSB) →

(NRPN) L → {(controller value) → L}

D#2 WHEEL ASSIGN DATA DENSITY Data Density (Wheel) C + ç → £ →

(density value) → L

E2 - MSB 1ST/LSB 1ST MSB/LSB invert C + ç → ˚

F2 - FOOT SW ASSIGN Footswitch Assign C + ç → {¬}

... (press repeatedly)

F#2- - - - -

G2 - - - - -

G#2 - PB DENSITY Data Density C + ç → § →

(Pitch Bend Wheel) (density value) → L

A2 SLIDER ASSIGN DATA DENSITY Data Density (Slider) C + ç → £ →

(density value) → L

F#3 - SELECT B Single-byte Data Send C + ç → {(single-byte data) → L}

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CBXK2 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CBXK2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info