Bedienungsanleitung Yamaha cdc-697 (Seite 16 von 178) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

161505

Zoom out

Zoom in

Vorherige Seite

1/178

Nächste Seite

■ Display information during

programming

1 Shows the program number for the track to be

programmed next.

2 Shows the selected disc and track number.

3 Shows the total time of the tracks currently

programmed.

4 Shows only the numbers of programmed tracks on the

selected disc.

* If “STEP 1” does not appear on the display after the

PROG button is pressed, press the TEXT/TIME display

mode-select button.

* If the total time exceeds 99 minutes and 59 seconds, the

time will not be displayed.

Notes

•You can program as many as 40 tracks at one time.

•You can program a whole disc by pressing “0”, instead of one

track. At that time, “ALL” lights up in the display.

• The total time of the programmed tracks will not be

displayed, if a track number higher than 20 is programmed.

• If, during programming, the TEXT/TIME display mode-

select button is pressed, the program number display can be

changed to display the total time of the programmed tracks or

no information. To return to the previous display, press the

TEXT/TIME display mode-select button once again.

•The t and y buttons can be used during playback, but

only within the range of the programmed tracks.

•Pressing a numeric button stops the current program and

skips to the beginning of the track of the number pressed.

Once that track has finished playback, the previously

interrupted program resumes playback.

•The e and r buttons can be used during playback to

search all tracks, including unprogrammed tracks.

■ To stop program play

Press the a button. The first programmed track number will

be displayed.

To resume playback, press the w button. Playback will start

from the beginning of the program.

■ To cancel a programmed sequence

There are several methods, as described below.

•Press the a button or the CLEAR button while the unit

is stopped.

• Open the disc tray.

•Press the STANDBY/ON button.

• Switch off the power.

■ To check program data

1 During program play, press the a button.

2 Press the PROG button.

3 Each time the y button is pressed, the track numbers

and sequential order of the programmed tracks can be

checked one after another. The display of the track

number can be returned (sequentially in reverse order) by

pressing the t button.

■ To correct program data

1 Follow the procedure described in “To check program

data”.

2 Display the track number to be corrected by pressing the

t or y button.

3 Press a numeric button to select a track to replace the one

displayed. The previously programmed track will be

cleared from the memory and the new one will be

programmed.

4 After the correction has been completed, press the

PROG button or w button once again.

-- STEP 1

1 2 3 4 5

1DISC

5DISCS

TITLE

REP RNDM SAVE BEST EDIT FILE

SFPROG CD- TEXT

ARTIST TRACK

123 4 5

678 910

11 12 13 14 15

16 17 18 19 20

-6 STE 3:25

1 2 3 4 5

1DISC

5DISCS

TITLE

REP RNDM SAVE BEST EDIT FILE

SFPROG CD- TEXT

ARTIST TRACK

123 4 5

6 789

11 12 13 14 15

16 17 18 19 20

VARIOUS FUNCTIONS

01_En_03_play_CDC-697_G.pm 7/6/06, 0:5514

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha cdc-697 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info