Bedienungsanleitung Yamaha CDRD651 (Seite 13 von 33) (Englisch)

18179

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

E-12

RECORDING TO A DISC .......................................................

Basic Recording Operation

Recording is done on disc tray B of this unit. Disc tray A is

used for playback only. Recording operation is described

with buttons on this unit and the remote control. These

button names are noted in the order of “button name

(remote control button name)”.

■ To load a disc

Press POWER on the front panel to turn on the

power.

Press v for disc tray B on your right (OPEN/

CLOSE B on the remote) to open the disc tray.

Load a disc to be used for recording, correctly

aligned in the recessed area of the disc tray with

its recordable side facing down.

When loading an 8 cm (3 in.) disc, place it in the inner

recessed area of the disc tray. Do not put a normal 12

cm (5 in.) disc on top of an 8 cm disc.

Press v (OPEN/CLOSE B on the remote) to

close the disc tray.

Note

• You can also close the disc tray by pressing the front edge of

the disc tray gently.

When a new disc is loaded in this unit, this unit performs a

number of internal operations to determine the format and

content of the disc. During this time, “Reading” appears in

the display. This process requires approximately 10

seconds to complete for any type of disc.

When a CD-R disc without finalization performed or a CD-

RW disc is loaded in this unit, OPC (Optimum Power

Calibration) is automatically performed to make an optimal

recording. OPC optimizes the laser power to the reflectivity

of the disc.

During OPC, “OPC Adjust” appears in the display. This

process requires approximately 15 seconds for a CD-R and

45 seconds for a CD-RW to complete.

Note

• OPC data is memorized both in this unit and the disc. This unit

can memorize the OPC data for up to 24 discs. After 24 discs

are reached, the oldest OPC data will be deleted and the newest

one will be added.

OPC process will not be performed on the disc if its OPC data

has been already in this unit’s memory. (When Disc Erase is

performed on a CD-RW disc, its OPC data will be also erased.)

After the disc has been read and any necessary internal

adjustments have been performed, one of the following

displays appears, and normal operation is possible.

When a prerecorded audio CD is loaded in this unit

When a new CD-R or CD-RW disc is loaded in this unit

NATURAL SOUND CD RECORDER CDR–D651

POWER

DISC A DISC B

DISPLAY A TEXT

TIME DISPLAY B

Recordable

ReWritable

COPY

REC MODE TRACK NO.

FINALIZE ERASE

INPUT

MULTI JOG

DIGITAL REC LEVEL

DISC A DIGITAL ANALOG

PUSH MODE

PHONES LEVEL

MIN MAX

ANALOG REC LEVEL

MINFADE IN

OUT MAX

REC MUTE

REC

1 2,4 3

COPY

FADE IN

OUT

REC

REC MUTE

TRACK NO.

WRITE

REC MODE

FINALIZE ERASE

DISPLAY

OPEN

Reading

–60 –30 –I0 –6 –4 –2 –I0

OVER

–60 –30 –I0 –6 –4 –2 –I0

OVER

CD–R

–60 –30 –I0 –6 –4 –2 –I0

OVER

OPC Adjust

–60 –30 –I0 –6 –4 –2 –I0

OVER

RECORDING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CDRD651 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CDRD651

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info