Bedienungsanleitung Yamaha CDRD651 (Seite 3 von 219) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

18179

Zoom out

Zoom in

Vorherige Seite

1/219

Nächste Seite

E-2

PRECAUTIONS: READ THIS BEFORE OPERATING THIS UNIT ............

• To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

• Install this unit in a well ventilated, cool, dry, clean place

with at least 5 cm of ventilation space on the top, right

and left, and at the back of this unit – away from direct

sunlight, heat sources, vibration, dust, moisture, and/or

cold.

• Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds. To

prevent fire or electrical shock, do not place this unit

where it may get exposed to rain, water, and/or any type

of liquid.

• Do not expose this unit to sudden temperature changes

from cold to hot, and do not locate this unit in a

environment with high humidity (i.e. a room with a

humidifier) to prevent condensation inside this unit, which

may cause an electrical shock, fire, damage to this unit,

and/or personal injury.

• On the top of this unit, do NOT place:

• Other components, as they may cause damage and/or

discoloration on the surface of this unit.

• Burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury.

• Containers with liquid in them, as they may cause

electrical shock to the user and/or damage to this unit.

• Do not cover the rear panel of this unit with a newspaper,

tablecloth, curtain, etc. in order not to obstruct heat

radiation. If the temperature inside this unit rises, it may

cause fire, damage to this unit, and/or personal injury.

• Do not plug in this unit to a wall outlet until all connections

are complete.

• Do not operate this unit upside-down. It may overheat,

possibly causing damage.

• Do not use force on switches, knobs and/or cords.

• When disconnecting the power cord from the wall outlet,

grasp the plug; do not pull the cord.

• Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

• Only voltage specified on this unit must be used. Using

this unit with a higher voltage than specified is dangerous

and may cause fire, damage to this unit, and/or personal

injury. YAMAHA will not be held responsible for any

damage resulting from use of this unit with a voltage

other than specified.

• To prevent damage by lightning, disconnect the power

cord from the wall outlet during an electrical storm.

• Take care of this unit so that no foreign objects and/or

liquid drops inside this unit.

• Do not attempt to modify or fix this unit. Contact qualified

YAMAHA service personnel when any service is needed.

The cabinet should never be opened for any reasons.

• When not planning to use this unit for long periods of time

(i.e. vacation), disconnect the AC power plug from the

wall outlet.

• Be sure to read the “Troubleshooting” section on

common operating errors before concluding that this unit

is faulty.

• Before moving this unit, first check that there is no disc in

the disc tray. To prevent damage to this unit, be sure to

insert the transportation pad in the disc tray. Finally,

press POWER to turn off this unit, and disconnect the AC

power plug from the wall outlet. After this unit is moved,

remove the pad to ensure correct operation.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT:

The wires in the mains lead are coloured in accordance with the

following code:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying the

terminals in your plug, proceed as follows: The wire which is

coloured BLUE must be connected to the terminal which is

marked with the letter N or coloured BLACK. The wire which is

coloured BROWN must be connected to the terminal which is

marked with the letter L or coloured RED. Making sure that

neither core is connected to the earth terminal of the three pin

plug.

For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the

instructions described above.

Note: The plug severed from the mains lead must be

destroyed, as a plug with bared flexible cord is hazardous if

engaged in a live socket outlet.

Laser component in this product is capable of emitting

radiation exceeding the limit for Class 1.

Voltage Selector (General model only)

The voltage selector on the rear panel of this unit must

be set for your local main voltage BEFORE plugging into

the AC power supply.

Voltages are 110/120/220/240 V AC, 50/60 Hz.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CDRD651 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CDRD651

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info