Bedienungsanleitung Yamaha CDVW901 (Seite 12 von 28) (Englisch)

29332

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

BASIC OPERATION (PLAYBACK OF A DISC)

The buttons with the same name on the front panel and

remote control unit have the same functions.

● The STANDBY indicator is lit while the power is OFF.

1. Press POWER.

Set the TV to the function (input) to which the player is

connected.

2. Press appropriate OPEN/CLOSE to open the

disc table.

Operations marked with [ ] are made from the remote

control unit.

Front Panel

To play a CD

To play an LD

Front Panel

4. Press 3.

● Playback of the CDV starts with the video part.

● Place only one disc, LD or CD, at a time.

3. Place a disc on the disc table.

To place an LD

To place a CD

After using a CD, the CD tray opens when you press OPEN/

CLOSE on the remote control unit. To playback an LD, use

OPEN/CLOSE on the front panel.

Front Panel

POWER

STANDBY

PLAY

3 PLAY

÷ For the connections, refer to pages 8 and 9.

Disc placing position

The CD/CDV or single-sided LD should be placed with the label

side facing up and the double-sided LD should be placed so that

the label of the side to be played faces up. Place any disc correctly

along the guide groove provided for each size.

Caution in placing a disc

Be careful not to deviate a disc from the guide groove on the

disc table, for this will make proper playback impossible and

could cause a malfunction such as disc damage.

For safety!

●

Be careful not to catch your finger in the disc table when it

draws in. Also take care to prevent a small child from opening

the disc table cover and inserting their hand inside the player to

prevent injury.

●

Do not place an object other than a disc on the disc table.

Convenient feature (Auto power-ON function)

● When the power is OFF, pressing OPEN/CLOSE turns on the

power automatically and opens the disc table.

● When you have turned the power OFF with a disc left inside

the player, simply press 3 on the front panel; the power turns

ON automatically and playback of the disc starts.

● The above features cannot be operated with the remote control

unit.

Playback by specifying side A or B

In this description, side A refers to the surface facing up when the

disc is placed on the disc table, and side B refers to the other side.

Note that they are not always the same as disc sides A and B as

recorded on the disc.

It is recommended to place a disc so that the side labeled

"SIDE A" faces upward.

To play side A only: When the disc with the side labeled "SIDE

A" is facing up, press DISC SIDE A without pressing 3. The

player will stop after having played side A.

To play side B only; Press DISC SIDE B without pressing 3 . The

player will stop after having played side B.

If the disc has been placed with the recorded "SIDE B" facing up,

DISC SIDE A plays side B and DISC SIDE B plays side A.

Display when the disc side is switched

● Turning from side A

to side B

● Turning from side B to

side A

CD single:8 cm (3 in.)

CD, CDV, video single:12 cm (5 in.)

LD, LD single:20 cm (8 in.)

LD:30 cm (12 in.)

LD disc table :

CD disc table :

CD single:8 cm (3 in.)

CD, CDV, video single:12 cm (5 in.)

POWER

CDLD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CDVW901 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info