Bedienungsanleitung Yamaha CDX-E100RDS (Seite 4 von 31) (Englisch)

557313

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

E-2

IMPORTANT:

The wires in the mains lead are coloured in accordance

with the following code:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows: The wire which is coloured BLUE

must be connected to the terminal which is marked

with the letter N or coloured BLACK. The wire which

is coloured BROWN must be connected to the terminal

which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

CAUTIONS

• To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

• Install your unit in a well ventilated, cool, dry, clean

place – away from windows, heat sources, vibration,

dust, moisture, or cold. To avoid humming sounds,

locate the unit away from other electrical appliances,

motors, and transformers. To prevent fire or electrical

shock, do not expose to rain and water.

• (U.K. and Europe models only)

Be sure to allow at least 10 cm of ventilation space at

the top, on left, right, and back sides of RX-E100.

• Do not operate the unit upside-down. It may overheat,

possibly causing damage.

• Never open the cabinet. If something drops into the set,

contact your dealer.

• Do not use force on switches, knobs or cords.

• Always set the VOLUME control to minimum before

starting playback of an audio source: increase the

volume gradually to an appropriate level after play has

started.

• When not planning to use this unit for long periods of

time (i.e., vacation, etc.), disconnect the AC power plug

from the wall outlet.

• Grounding or polarization – Precautions should be taken

so that the grounding or polarization of the unit is not

defeated.

• Do not clean the unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

• Be sure to read the “Troubleshooting” section on

common operating errors before concluding that your

unit is faulty.

• Do not place another component on top of this unit, as

damage or discoloration on the surface of the unit may

result.

• To prevent damage by lightning, disconnect the power

cord from the wall outlet during an electrical storm.

• When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

• Do not plug the AC power plug to the wall outlet before

you finish all connections.

• The voltage to be used must be the same as that

specified on this unit. Using this unit with a higher

voltage than that which is specified is dangerous and

may result in a fire or other type of accident causing

damage. YAMAHA will not be held responsible for any

damage resulting from use of this unit with a voltage

other than that which is specified.

• When listening to the receiver at a high volume level for

a long time, the temperature inside the unit rises. To

prevent overheating and possible damage to this unit,

the internal fan starts running.

• Sudden temperature changes and storage or operation in

an extremely humid environment may cause

condensation inside the cabinet.

PRECAUTIONS: READ THIS BEFORE OPERATING THE UNIT

This compact disc player is

classified as a CLASS 1

LASER product.

The CLASS 1 LASER

PRODUCT label is located

on the rear exterior.

CLASS 1 LASER PRODUCT

Laser component in this product is capable of

emitting radiation exceeding the limit for Class 1.

CAUTION FOR CARRYING THE UNIT

Before carrying the unit, first remove all discs from

the unit, press STANDBY/ON to turn the unit off,

then disconnect the AC power plug from the wall

outlet.

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

The unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this

unit itself is turned off. This state is called the standby

mode. In this state, this unit is designed to consume a

very small quantity of power.

For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described above.

Note: The plug severed from the mains lead must be

destroyed, as a plug with bared flexible cord is hazardous

if engaged in a live socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CDX-E100RDS Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info