Bedienungsanleitung Yamaha CLP-154S (Seite 20 von 35) (Englisch)

590507

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

Other MIDI Functions

The MIDI functions listed to the right

are engaged by holding down the [MIDI/

TRANSPOSE] button and pressing the

corresponding voice selector. Full details

are given in the following pages.

“Local Control” refers to the fact that, normally, the Clavinova keyboard controls its internal tone generator,

allowing the internal voices to be played directly from the keyboard. This situation is “Local Control ON” since

the internal tone generator is controlled locally by its own keyboard.

Local control can be turned OFF, however, so that the Clavinova keyboard does not play the internal voices,

but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on

the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI

IN connector.

When using the DOU-10 Disk Orchestra Unit with the Clavinova, for example, Local Control should be

turned OFF when recording using the DOU-10 voices only, and ON when recording the Clavinova voices while

listening to playback of the DOU-10 voices.

ZHold down the [MIDI/TRANSPOSE] button.

XPress the [PIANO 1] voice selector. If the PIANO 1 LED is lit when

the [PIANO 1] voice selector is pressed, you have turned local control

OFF. If the PIANO 1 LED is not lit when the [PIANO 1] voice selector

is pressed, you have turned local control ON.

CRelease the [MIDI/TRANSPOSE] button.

Normally the Clavinova will respond to MIDI program change numbers received from an external keyboard

or other MIDI device, causing the correspondingly numbered Clavinova voice to be selected. The Clavinova

will normally also send a MIDI program change number whenever one of its voices is selected, causing the

correspondingly numbered voice or program to be selected on the external MIDI device if the device is set up to

receive and respond to MIDI program change numbers.

This function makes it possible to cancel program change number reception and transmission so that voices

can be selected on the Clavinova without affecting the external MIDI device, and vice versa.

ZHold down the [MIDI/TRANSPOSE] button.

XPress the [PIANO 2] voice selector. If the PIANO 2 LED is lit when

the [PIANO 2] voice selector is pressed, you have turned program

change reception/transmission OFF. If the PIANO 2 LED is not lit

when the [PIANO 2] voice selector is pressed, you have turned pro-

gram change reception/transmission ON.

CRelease the [MIDI/TRANSPOSE] button.

● Local Control ON/OFF

● Program Change ON/OFF

Function

CLP-154

S CLP-155

Voice Selector Voice Selector

Local Control ON/OFF [PIANO 1] [PIANO 1]

Program Change ON/OFF [PIANO 2] [PIANO 2]

Control Change ON/OFF [CLAVINOVA TONE] [CLAVINOVA TONE]

Multi-Timbre Mode [E. PIANO] [E. PIANO]

MIDI Split & Left Local OFF [HARPSICHORD] [HARPSICHORD]

MIDI Split & Right Local OFF [ORGAN] [VIBES]

Panel Data Transmit - none - [STRINGS]

MIDI FUNCTION CHART

= Program Change OFF

= Program Change ON

MIDI/

TRANSPOSE

PIANO 2

PIANO 1

PIANO 2

CLAVIN

TON

= Local Control OFF

= Local Control ON

MIDI/

TRANSPOSE

PIANO 1

PIANO 2

CLAVIN

TON

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-154S Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-154S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info