Bedienungsanleitung Yamaha CLP-154S (Seite 22 von 35) (Englisch)

590507

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

In the MIDI split mode one section of the Clavinova keyboard is used to play a Clavinova voice in the normal

way, while the remaining section is used to play a second MIDI keyboard or tone generator such as the Yamaha

DOU-10 Disk Orchestra Unit. In this mode the right-hand section of the keyboard is used to play an internal

Clavinova voice, while the left-hand section of the keyboard plays the external keyboard or tone generator.

Playing the left-hand section of the keyboard produces no sound from the Clavinova. The “split point,” or the

key that divides the left- and right-hand sections of the keyboard can be set at any desired key.

● The MIDI Split & Left Local OFF Mode

The MIDI split mode is useful if, for example, you want to play a piano

(Clavinova) voice with the right hand while playing a synthesizer bass line

or string section with the left hand.

When the MIDI split mode is activated, notes played on the left-hand

section are transmitted via the Clavinova MIDI OUT connector on MIDI

channel 2. Notes played on the right-hand section are transmitted on the

“basic channel” (i.e. the channel set using the MIDI channel selection func-

tion described previously).

ZPress the [HARPSICHORD] voice selector while holding down the

[MIDI/TRANSPOSE] button. The HARPSICHORD LED will flash.

XWhile still holding the [MIDI/TRANSPOSE] button, press the key on

the keyboard at which you want to set the split point. The HARPSI-

CHORD LED will light continuously. The split-point becomes the first

key of the left-hand section.

CRelease the [MIDI/TRANSPOSE] button.

VTo return to the normal full-keyboard mode, hold the [MIDI/TRANS-

POSE] button and press the [HARPSICHORD] voice selector, then

release both buttons.

NOTE

• When the power is turned ON the default split point key — F

2 — will be

automatically selected. If a new split point is selected it remains active

until the power is turned OFF or a different split point is selected.

▼

Left-hand section plays

a DOU-10 bass voice.

Right-hand section plays a

Clavinova piano voice.

SPLIT POINT

● The MIDI Split & Right Local Off Mode

In the CLP-154S/155 either the right- or left-hand section of the keyboard can be assigned to control an exter-

nal keyboard or tone generator. Assigning the left-hand section to external tone generator control was described

in the previous section. To assign the right-hand section to external tone generator control while playing the

Clavinova voices with the left hand, press the [ORGAN] voice selector on the CLP-154S or the [VIBES] voice

selector on the CLP-155 instead of the [HARPSICHORD] voice selector when activating the Split mode (see

the preceding section). All other operations are exactly the same as described in the previous section.

(Set to receive on

MIDI channel 2)

DOU-10

OUT PUT

AUX IN

RMIDI OUT

MIDI

Clavinova

MIDI/

TRANSPOSE

INOVA

E. PIANO

HARPSI-

CHORD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-154S Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-154S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info