Bedienungsanleitung Yamaha CLP-156 (Seite 12 von 45) (Englisch)

590511

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Touch Sensitivity

Four different types of keyboard touch sensitivity — HARD, MEDIUM, SOFT or FIXED —

can be selected to match different playing styles and preferences. The different touch sen-

sitivity settings are selected by using the [MIDI/TRANSPOSE] and [REVERB] buttons.

To select a touch sensitivity setting press the [REVERB] button a few times

while holding the [MIDI/TRANSPOSE] button until the indicator correspond-

ing to the desired setting lights.

MIDI/

TRANSPOSE

REVERB

ROOM

HALL 1

HALL 2

COSMIC

● Memorizing the Touch

Sensitivity Setting

Press the C7 key while holding the [MIDI/TRANSPOSE] and [REVERB]

button to memorize the current touch sensitivity setting. The memorized setting

will be retained in memory for about one week after the power is turned off,

then the default setting (MEDIUM) will be restored. To keep the memorized

setting for longer periods, turn the power on briefly at least once a week.

If this setting is not memorized as described above, it is retained in memory

only until the Clavinova is turned off.

Pressing the soft pedal reduces the volume and slightly changes the timbre of

notes played.

If you play a note or chord on the keyboard and press the sostenuto pedal while

the note(s) are held, those notes will be sustained as long as the pedal is held (as if

the damper pedal had been pressed) but all subsequently played notes will not be

sustained. This makes it possible to sustain a chord, for example, while other notes

are played “staccato.”

The damper pedal functions in the same way as a damper pedal on an acoustic

piano. When the damper pedal is pressed notes played have a long sustain. When

no REVERB effect is selected and a piano voice is selected, the damper pedal also

produces a special “resonance” that simulates the ring of the strings and the sound

board of an acoustic piano. Releasing the pedal immediately stops (damps) any

sustained notes. The CLP-156 damper pedal additionally features continuous

damping. This allows you to create shorter effects by pressing the damper pedal

down only part of the way.

The CLP-156 has three foot pedals that produce a range of expressive effects similar to

those produced by the pedals on an acoustic piano.

● Soft (Left) Pedal

The Pedals

● Sostenuto (Center) Pedal

● Damper (Right) Pedal

MIDI/

TRANSPOSE

REVERB

ROOM

HALL 1

HALL 2

COSMIC

HARD (ROOM indicator) ...........The HARD setting requires the keys to be played quite hard to produce maxi-

mum loudness.

MEDIUM (HALL 1 indicator)......The MEDIUM setting produces a fairly “standard” keyboard response. This is

the initial factory default setting.

SOFT (HALL 2 indicator) ...........The SOFT setting allows maximum loudness to be produced with relatively

light key pressure.

FIXED (No indicator lit) ..............All notes are produced at the same volume no matter how hard the keyboard is

played. This is an ideal setting for voices which normally have no keyboard

sensitivity (i.e. harpsichord and organ).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-156 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info