Bedienungsanleitung Yamaha CLP-320 (Seite 29 von 44) (Englisch)

590577

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

MIDI Functions

CLP-320 Owner’s Manual

ENGLISH

MIDI Functions

You can make detailed adjustments to MIDI settings.

MIDI Transmit/Receive Channel Selection

In Dual mode, Voice 1 data is

transmitted on its speciﬁed

channel and Voice 2 data is

transmitted on the next greater

channel number relative to the

speciﬁed channel. In this mode,

no data is transmitted if the

transmit channel is set to “OFF.”

MIDI receive channel is ALL:

A “Multi-timbre” Receive mode

is available. In this mode, this

instrument receives different

parts from the connected MIDI

device on any or all 16 MIDI

channels and plays multi-chan-

nel song data.

MIDI receive channel is 1+2:

A “1+2” Receive mode is avail-

able. It allows simultaneous

reception on channels 1 and 2

only, enabling this instrument to

play 1 and 2 channel song data

received from a music computer

or sequencer.

Program change and other like

channel messages received will

not affect this instrument’s

panel settings or the notes you

play on the keyboard.

Data for the demo song and 50

piano preset songs cannot be

transmitted via MIDI.

CAUTION

When Local control is turned

OFF, the keyboard of this instru-

ment does not play the internal

voices.

In any MIDI control setup, the MIDI channels of the transmitting and receiving equip-

ment must be matched for proper data transfer.

This parameter enables you to specify the channel on which the instrument transmits

or receives MIDI data.

Setting the transmit channel

While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously,

press one of the C1–E2 keys.

Setting the receive channel

While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously,

press one of the C4–F5 keys.

Local Control ON/OFF

“Local Control” refers to the fact that, normally, the keyboard of this instrument con-

trols its internal tone generator, allowing the internal voices to be played directly from

the keyboard. This situation is “Local Control On,” since the internal tone generator is

controlled locally by its own keyboard.

Local control can be turned OFF, however, so that the keyboard of this instrument does

not play the internal voices, but the appropriate MIDI information is still transmitted

via the MIDI OUT connector when notes are played on the keyboard. At the same

time, the internal tone generator responds to MIDI information received via the MIDI

IN connector.

While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously,

press the C6 key. Pressing the C6 key repeatedly toggles between Local Control On and

Off.

Procedure

C1 C4 F5

OFF



1356810

24 7911 14 16

12 13 15

ALL

1356810

24 7911 14 16

12 13 15

1+2



(C1–D

(C4–F5)

For setting the

transmit channels.

For setting the

receive channels.

The highest key

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-320 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-320

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info