Bedienungsanleitung Yamaha CLP-370 (Seite 22 von 108) (Englisch)

590641

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Selecting & Playing Voices

CLP-370/340/330, CLP-S308/S306 Owner’s Manual

ENGLISH

Adding Variations to the Sound — [VARIATION]

(CLP-370/340)/[BRILLIANCE]/[REVERB]/[EFFECT]/

[DAMPER RES.]

[VARIATION] (CLP-370/340)

Lets you alter another aspect of the effect, depending on the selected type.

Refer to “Preset Voice List” on page 92 for more information on the characteristics of

each variation.

Pressing the [VARIATION] or selected voice button toggles the variation on and off.

The indicator lights (ON) when [VARIATION] is enabled.

[BRILLIANCE]

This control can be used to change the tonality or “timbre” of the sound output.

BRIGHT: Bright tone

NORMAL: Standard tone

MELLOW: Soft and mellow tone

To select a brilliance type, press the [BRILLIANCE] button a few times until the indica-

tor corresponding to the desired type lights (the indicator lights in sequence each time

you press the [BRILLIANCE] button). Brilliance can be selected among ﬁve types. When

two adjacent indicators are lit, the type that is between the two indicated types is

selected. For example, when both NORMAL and MELLOW are lit, the brilliance set-

ting between NORMAL and MELLOW is selected. This parameter affects the entire

sound of the instrument.

[REVERB]

This control enables you to select various digital reverb effects that would add extra

depth and expression to the sound to create a realistic acoustic ambience.

OFF: When no reverb effect is selected, no REVERB indicator is lit.

ROOM: This setting adds a continuous reverb effect to the sound, similar to the

acoustic reverberation you would hear in a room.

HALL 1: For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates

the natural reverberation of a small-size concert hall.

HALL 2: For a truly spacious reverb sound, use the HALL 2 setting. This effect simu-

lates the natural reverberation of a large concert hall.

STAGE: Simulates the reverb of a stage environment.

CLP

370

[–/NO] [+/YES]

buttons

[VARIATION] button

[REVERB]

button

[BRILLIANCE]

button

[EFFECT]

button

[DAMPER RES.]

button

NOTE

Normal setting = OFF

TERMINOLOGY

Normal setting:

The “Normal setting” refers to the

default setting (factory setting)

obtained when you ﬁrst turn on

the power to the Clavinova.

NOTE

The left pedal can be assigned to

ON or OFF the variation via the

“Left Pedal Mode” function

described on page 66.

NOTE

Normal setting = NORMAL

NOTE

When the BRILLIANCE is set to

BRIGHT, the overall sound will be

slightly louder. If the MASTER

VOLUME is set at a high level the

sound may become distorted. If

so, lower the MASTER VOLUME

level.

Procedure

NOTE

The default reverb type (including

OFF) and depth settings are dif-

ferent for each voice.

NOTE

Releasing the [REVERB] button

changes the reverb type.

If you have changed the reverb

depth, releasing the [REVERB]

button will not change the reverb

type.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-370 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-370

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info