Bedienungsanleitung Yamaha CLP-370 (Seite 31 von 108) (Englisch)

590641

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Recording Your Performance

CLP-370/340/330, CLP-S308/S306 Owner’s Manual

ENGLISH

1. Make all the initial settings.

Before you begin to record, select the voice you want to record (or voices if you

will be using Dual or Split mode). Make any other desired settings (reverb,

effect, etc.) as well. You might also want to set the volume.

You can also adjust the playback volume using the [MASTER VOLUME] slider.

2. Engage Record Ready mode.

Press the [REC] button to engage Record Ready mode. This automatically selects

an empty song for recording and makes the RIGHT part active. If an empty

song does not exist, Song U01 will be selected. Recording does not actually start

yet.

The SONG [PLAY/PAUSE] indicator will ﬂash at the current METRONOME

tempo setting.

You can turn on the metronome in this step, and adjust the tempo by using the

[TEMPO/FUNCTION ▼, ▲] buttons. (Range: 32 – 280)

Record Ready mode can be disengaged before recording by pressing the [REC]

button again.

3. Start recording.

Recording will begin automatically as soon as you play a note on the keyboard

or press the SONG [PLAY/PAUSE] button. The current measure’s number will

appear on the display while recording.

4. Stop recording.

Press either [REC] or SONG [STOP] button to stop recording. When recording is

stopped, dashes appear in the display in succession to indicate that the recorded

data is being saved to the instrument automatically. After the data is saved, the

song name (U01 – U03) appears in the display. The recorded part’s indicator

will glow green to indicate that it now contains data. (Record mode is disen-

gaged automatically.)

CAUTION

Do not turn off the power of the instrument when dashes appear in the display in suc-

cession. Doing so may delete all song data in the instrument, including external songs

(page 43).

Procedure

NOTE

When the instrument is in Demo

Song mode or during a ﬁle opera-

tion, Record mode cannot be

engaged.

NOTE

Recording capacity

You can record up to a maximum

three songs, or up to a maximum

of about 100KB (11,000 Notes) in

each song on the instrument

depending on pedal usage and

other factors.

NOTE

If you have selected the LEFT

part previously in the same song,

the LEFT part will automatically

be made active when pressing

the [REC] button in step 2.

NOTE

If the metronome was on when

you started recording, you’ll be

able to keep time with the metro-

nome while recording, but the

metronome sound will not be

recorded.

NOTE

For more recording information,

see page 34.

NOTE

The left pedal can be assigned to

start recording via the “Left Pedal

Mode” function described on

page 66.

NOTE

If the memory becomes full dur-

ing recording, “FUL” will appear

on the display and recording will

stop automatically. (All recorded

data up to that point will be

retained.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-370 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-370

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info