Bedienungsanleitung Yamaha CLP-370 (Seite 41 von 108) (Englisch)

590641

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

ENGLISH

CLP-370/340/330, CLP-S308/S306 Owner’s Manual

Handling the USB Storage Device (USB Flash Memory/

Floppy Disk, etc.)

Precautions when using the USB [TO DEVICE]

terminal

This instrument features a built-in USB [TO DEVICE] ter-

minal. When connecting a USB device to the terminal, be

sure to handle the USB device with care. Follow the

important precautions below.

Compatible USB devices

USB storage devices (ﬂash memory, ﬂoppy disk drive,

hard disk drive, etc.)

The instrument does not necessarily support all commer-

cially available USB devices. Yamaha cannot guarantee

operation of USB devices that you purchase. Before pur-

chasing a USB device for use with this instrument, please

visit the following web page:

http://music.yamaha.com/download/

Connecting USB device

When connecting a USB device to the USB [TO DEVICE]

terminal, make sure that the connector on the device is

appropriate and that it is connected in the proper direction.

CAUTION

When connecting a USB device to the USB [TO DEVICE] termi-

nal on the top panel, remove it before closing the key cover. If

the key cover is closed with the USB device connected, the USB

device may be damaged.

Using USB Storage Devices

By connecting the instrument to a USB storage device,

you can save data you’ve created to the connected device,

as well as read data from the connected device.

The number of USB storage device to be

used

Only one USB storage devices can be connected to the

USB [TO DEVICE] terminal.

Formatting USB storage media

When a USB storage device is connected or media is

inserted, a message may appear prompting you to format

the device/media. If so, execute the Format operation

(page 40).

CAUTION

The format operation overwrites any previously existing data.

Make sure that the media you are formatting does not contain

important data.

To protect your data (write-protect)

To prevent important data from being inadvertently

erased, apply the write-protect provided with each stor-

age device or media. If you are saving data to the USB

storage device, make sure to disable write-protect.

Connecting/removing USB storage device

Before removing the media from the device, make sure

that the instrument is not accessing data (such as in the

Save, Copy and Delete operations).

CAUTION

Avoid frequently turning the power on/off to the USB storage

device, or connecting/disconnecting the device too often. Doing

so may result in the operation of the instrument “freezing” or

hanging up. While the instrument is accessing data (such as dur-

ing Save, Copy, Delete, Load and Format operations) or is

mounting the USB storage device (shortly after the connection),

do NOT unplug the USB connector, do NOT remove the media

from the device, and do NOT turn the power off to either device.

Doing so may corrupt the data on either or both devices.

Precautions when using the USB [TO HOST]

terminal

When connecting the computer to the USB [TO HOST]

terminal, make sure to observe the following points.

Failing to do so risks freezing the computer and corrupting

or losing the data. If the computer or the instrument

freezes, restart the application software or the computer

OS, or turn the power to the instrument off then on again.

CAUTION

• Use an AB type USB cable of less than about 3 meters.

• Before connecting the computer to the USB [TO HOST] termi-

nal, exit from any power-saving mode of the computer (such

as suspended, sleep, standby).

• Before turning on the power to the instrument, connect the

computer to the USB [TO HOST] terminal.

• Execute the following before turning the power to the instru-

ment on/off or plugging/unplugging the USB cable to/from

the USB [TO HOST] terminal.

- Quit any open application software on the computer.

- Make sure that data is not being transmitted from the instru-

ment. (Data is transmitted only by playing notes on the key-

board or playing back a song.)

• While a USB device is connected to the instrument, you should

wait for six seconds or more between these operations: (1)

when turning the power of the instrument off then on again,

or (2) when alternately connecting/disconnecting the USB

cable.

NOTE

For more information about the handling of USB devices, refer to the

owner’s manual of the USB device.

NOTE

Other USB devices such as a computer keyboard or mouse cannot

be used.

NOTE

Although CD-R/RW drives can be used to read data to the instru-

ment, they cannot be used for saving data.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-370 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-370

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info