Bedienungsanleitung Yamaha CLP-380 (Seite 108 von 136) (Englisch)

590676

108

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

CLP-380 Owner’s Manual

108

Detailed Settings

Questions about Operations and Functions

■ The buttons do not respond.

While you are using a function, some buttons not used

for the function are disabled. If the song is playing, stop

the playback. Otherwise, press the [EXIT] button to

return to the main screen. Then, perform the desired

operation.

■ The sound sustains indeﬁnitely and does

not decay when I press the sostenuto

pedal.

With the voices in the CHURCH ORGAN, JAZZ

ORGAN, STRINGS, CHOIR group, or some voices in the

XG group, the sound continues sustaining while you are

holding down the sostenuto pedal.

■ Higher or lower notes does not sound

correctly when the transpose or octave

setting is made.

The setting range for the transposition and octave setting

is C -2 – G8. (With the normal setting, the Clavinova’s 88

keys covers the range of A -1 – C7.) If the lowest key is set

to a note lower than C -2, it will produce a sound one

octave higher. If the highest key is set to a note higher

than G8, it will produce a sound one octave lower.

■ How can I return to the recording or song

select screen during song recording or

playback?

Press the [SONG SELECT] button once.

■ The tempo does not change even though

I recorded with tempo changes.

Depending on the timing of tempo changes, the changed

tempo may not be recorded. In this case, the recording

will be played back at the original tempo.

Make tempo changes when the recording part is selected

and a red part indicator is ﬂashing. The same trick applies

to editing the tempo after recording.

■ Performance in Dual or Split mode is not

recorded.

Part data is lost unexpectedly.

For Dual or Split mode recording, the recording part for

the second voice (that is, the voice for the left-hand part)

is automatically assigned (page 27). Therefore, if the part

already has data, the data will be overwritten during

recording. Also, switching to Dual mode or Split mode in

the middle of the song is not recorded. Therefore, the

notes you played with the second voice (or the notes

lower than the Split point) are not recorded.

What type of data is recorded?

Data recorded in the parts:

•Note data (notes you play)

•Voice selection

•Clavinova pedals and external pedal on/off

•Reverb depth [ReverbSend]

•Chorus depth [ChorusSend]

• DSP effect depth [DSPDepth]

•Sound brightness [Brightness]

•Resonance effect setting [HarmonicContent]

•Equalizer’s low-range frequency setting [EQLowFreq.]

•Equalizer’s low-range gain setting [EQLowGain]

•Equalizer’s high-range frequency setting [EQHighFreq.]

•Equalizer’s high-range gain setting [EQHighGain]

•Octave setting of the voice [Octave]

•Volume setting of each voice [Volume]

•Left/right position of each sound [Pan]

• Fine pitch adjustment between two voices (Dual only)

[Detune]

•Volume change in response to playing strength for each voice

[TouchSense]

Data recorded globally in all parts:

•Tempo

•Time signature

•Reverb type

•Chorus type

• DSP effect type

You can change all data except for note data, Octave

setting or Time Signature after recording.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-380 Seite 108

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-380

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info