Bedienungsanleitung Yamaha CLP-380 (Seite 123 von 136) (Englisch)

590676

123

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Precautions when using the USB [TO DEVICE] terminal

CLP-380 Owner’s Manual

123

Appendix

By connecting the instrument to a USB storage device, you can save data you’ve created to the connected device, as well as

read data from the connected device.

n Although CD-R/RW drives can be used to read data to the instrument, they cannot be used for saving data.

This instrument has two USB [TO DEVICE] terminals;

one on the left of the panel and one on the terminal at the

front.

Both are the same terminal; however, both cannot be used

at the same time. Use the [SELECT] switch to select the

desired terminal. Switching to “A” selects the terminal on

the left of the panel, while switching to “B” selects the

terminal panel at the front.

CAUTION

While the USB storage device is connected to the instrument, do

NOT use the [SELECT] switch.

CAUTION

While the instrument is accessing data (such as in the Save,

Copy and Delete operations), do NOT use the [SELECT] switch.

Doing so may corrupt the media or data.

n If you connect USB storage devices to both USB [TO

DEVICE] terminals, the devices may not operate

properly.

The number of USB storage device to be

used

Up to two USB storage devices can be connected to the

USB [TO DEVICE] terminal. (If necessary, use a USB

hub. The number of USB storage devices that can be used

simultaneously with musical instruments even when a

USB hub is used is a maximum of two.) This instrument

can recognize up to four drives in one USB storage device.

Formatting USB storage media

When a USB storage device is connected or media is

inserted, a message may appear prompting you to format

the device/media. If so, execute the Format operation

(page 46).

CAUTION

The format operation overwrites any previously existing data.

Make sure that the media you are formatting does not contain

important data. Proceed with caution, especially when

connecting multiple USB storage media.

To protect your data (write-protect)

To prevent important data from being inadvertently

erased, apply the write-protect provided with each

storage device or media. If you are saving data to the USB

storage device, make sure to disable write-protect.

Connecting/removing USB storage

device

Before removing the media from the device, make sure

that the instrument is not accessing data (such as in the

Save, Copy and Delete operations).

CAUTION

Avoid frequently turning the power on/off to the USB storage

device, or connecting/disconnecting the device too often. Doing

so may result in the operation of the instrument “freezing” or

hanging up. While the instrument is accessing data (such as

during Save, Copy, Delete, Load and Format operations) or is

mounting the USB storage device (shortly after the connection),

do NOT unplug the USB connector, do NOT remove the media

from the device, and do NOT turn the power off to either device.

Doing so may corrupt the data on either or both devices.

Using USB Storage Devices

USB TO DEVICE

SELECT

USB [TO DEVICE] terminal A

USB [TO DEVICE] terminal B

Select the desired

terminal

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-380 Seite 123

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-380

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info