Bedienungsanleitung Yamaha CLP-380PE (Seite 15 von 136) (Englisch)

590691

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Before Using the Clavinova

CLP-380 Owner’s Manual

Introduction

1. Connect the power cable.

First insert the plug of the power cable into the AC connector on the Clavinova, then plug the other end of the cable into the proper

AC outlet on the wall. For an illustration of the location of the [AC IN] connector, see “Panel Controls and Terminals” (page 10).

In some areas a plug adaptor may be provided to match the pin conﬁguration of the AC wall outlets in your area.

WARNING

Make sure your CLP-380 is rated for the AC voltage supplied in the area in which it is to be used (voltage rating appears on the name

plate on the bottom panel). In some areas, a voltage selector may be provided on the bottom panel of the main keyboard unit near the

power cord. Make sure that the voltage selector is set for the voltage in your area. Connecting the unit to the wrong AC supply can

cause serious damage to the internal circuitry and may even pose a shock hazard!

Use only the AC power cord supplied with the CLP-380. If the supplied cord is lost or damaged and needs to be replaced, contact

your Yamaha dealer. The use of an inappropriate replacement can pose a ﬁre and shock hazard!

The type of AC power cord provided with the CLP-380 may be different depending on the country in which it is purchased. (In some

areas a plug adaptor may be provided to match the pin conﬁguration of the AC wall outlets in your area.) Do NOT modify the plug pro-

vided with the CLP-380. If the plug will not ﬁt the outlet, have a proper outlet installed by a qualiﬁed electrician.

2. Turn on the power to the Clavinova.

Press the [POWER] switch located on the right of the keyboard to turn the power on.

The screen located in the center of the front panel and the power indicator located below the left end of the keyboard lights up.

Press the [POWER] switch again to turn off the power to the Clavinova.

The screen and the power indicator turn off.

You can adjust the contrast of the display by turning the [CONTRAST] knob located to the right of the LCD.

Turning the power on

Adjusting the display contrast

1-1

(The shape of plug differs depend-

ing on locale.)

(rear panel)

1-2

NO YES

Grand Piano 1

When you turn on the power to the Clavinova, a voice name appears on

the screen.

Power indicator

If you close the key cover without

turning the power off, the power

indicator remains lit, indicating that

the power is still on.

TIP

[POWER] switch

Power indicator

CAUTION

Even when the instrument is

turned off, electricity is still

ﬂowing to the instrument at the

minimum level. When you are

not using the instrument for a

long time or during electrical

storms, make sure you unplug

the AC power plug from the wall

AC outlet.

CONTRAST

EXIT

NO YES

Contrast

Difference between brightness and

darkness.

TERMINOLOGY

Use this knob.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-380PE Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-380PE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info