Bedienungsanleitung Yamaha CLP-411 (Seite 23 von 54) (Englisch)

590692

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Using the Recorder

Playback

To play back what you’ve recorded on the CLP-411, simply press the

RECORDER [START/STOP] button.

On the CLP-511 first make sure that the green track indicators of the tracks

you want to play are lit. If not, press the corresponding track button(s) so that

they are lit. Then press the RECORDER [START/STOP] button. Playback

starts from the beginning of the recorded data, and will stop automatically at

the end of the recorded data. You can also stop playback at any time by press-

ing the [START/STOP] button. To mute a CLP-511 track so that it doesn’t

play back, press the corresponding track button so that its indicator goes out

(press again to turn the track back on).

The current measure number appears on the display during playback.

NOTE

• It is possible to play along on the keyboard during playback.

• The playback volume and tempo can be adjusted by using the [MASTER VOL-

UME] control and [TEMPO/SONG] buttons (press both [TEMPO/SONG] buttons

simultaneously to recall the default tempo).

• CLP-411: All recorder data will be erased when the power is turned off. Store

recordings you want to keep to an external MIDI storage device such as the

Yamaha DOU-10 Disk Orchestra Unit by using the Bulk Dump function described

on page 28.

• CLP-511: All recorder data will be retained in memory for about one week after the

power is turned off. If you want to keep your recorded data for longer periods, turn

the power on for a few minutes at least once a week. It is also possible to store it to

an external MIDI storage device such as the Yamaha DOU-10 Disk Orchestra Unit

by using the Bulk Dump function described on page 28.

• The CLP-511 track indicators will not light automatically when the power is turned

on even if the recorder contains data. It is therefore necessary to press the track

buttons so that the corresponding green indicators light before starting RE-

CORDER playback. It is also a good idea to press the track buttons to check if the

tracks contain data before recording. If the green indicator lights when the corre-

sponding track button is pressed, that track contains data which will be erased and

replaced by the newly-recorded data.

• If the metronome is being used during playback, the metronome will stop when

playback is stopped.

• During recorder playback on the CLP-511, the volume of a track which is turned off

will always be “0” (i.e. the “Piano Song Part Cancel Volume” function — page 25 —

only affects piano song playback.

• The playback data is not transmitted via the MIDI OUT connector.

• Playback cannot be started when the demo/piano song mode or function mode is

engaged. CLP-511 playback can be started from the function mode, however, after

one of the track buttons — [1] or [2] — is pressed.

• Playback cannot be started when the recorder contains no data. CLP-511 playback

cannot be started when both track buttons are off.

START

STOP

REC

RECORDER

CLP-511

CLP-411

START

STOP

REC

RECORDER

Synchro Start (CLP-511) .......................................................................................

When the Synchro Start function is engaged, recorder playback will begin

automatically as soon as you start playing on the keyboard.

To engage the Synchro Start function press the [START/STOP] button

while holding a track button which is ON. The rightmost dot on the display will

flash at the current tempo. Playback will then start as soon as you begin playing

on the keyboard.

If you hold a track button which is OFF while pressing the [START/STOP]

button, that track will be turned ON and the Synchro Start mode will be engaged.

Left Pedal Start/Stop .................................................................................................

The left pedal can be assigned to start and stop recorder playback via the

“Left Pedal Mode” function described on page 25.

CLP-511

START

STOP

REC

RECORDER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-411 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-411

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info